best font to write research paper

5 fonts that add credibility and professionalism to scientific research

by ikumikayama | Apr 29, 2013 | Uncategorized | 14 comments

Choosing the right fonts can affect how your scientific research is received.

Note: This is part 2 of a 2-part blog series about choices in fonts. You can read part 1 here .

You are dressed in your best. You edited the manuscript with a fine-tooth comb…but are your figures and images wearing flip-flops?

Last time we talked about fonts that suck professionalism out of your scientific research . In this article, we’ll talk about fonts that actually add credibility and professionalism to your research. Dress your research in a custom-tailored suit by just using these fonts!

My friend and colleague, Cassio Lynm described how a good figure should be like a billboard found in many highways around the country. Anyone who sees the billboard will understand what they are advertising in a split second. If someone is confused or gets the wrong idea, the image is not very successful.

Similarly, the best professional fonts should be one that’s easy to read with very little “bells and whistles”. When writing prose of informational value such as scientific research, a reader should pay attention to what the text is describing, not how the text looks.  A good professional font should be like air–we don’t really even pay attention to it most of the time.

Some of the fonts I’ll share with you today are considered “boring” and “overused” by some. These fonts are everywhere because they are champions of legibility and simplicity.  Make your work professional and trustworthy by using a time-tested font.

[bra_divider height=’40’]

1. Arial- “All-Around Champion with IBM Roots”

According to fonts.com , Arial is one of the most used typefaces of the last 30 years. Its electronic origins go back to 1982 for IBM laser-xerographic printers by designers Robin Nicholas and Patricia Saunders. When it came out, it was supposed to compete with Helvetica, which was one of the core fonts in Apple Computers in the mid 1980’s.

Arial letters have more round shapes and the edges of letters do not end in a horizontal line. Instead, the edges are at an angle.

Arial is an easy-to-read font in small and large blocks of text. Nature requests that the figure text be in Arial or Helvetica. It’s especially nice for figure labels and legends. When using Arial as figure legends, keep the font size small ~8 points for best results.

2. Helvetica- “All-Around Champion with Apple Roots”

Helvetica is the most heavily-used font. Helvetica was originally designed by a Swiss designer named Max Miedinger in 1957. The font was designed to be an easy-to-read font. The name “Helvetica” comes from “Helvetia” – Latin name for Switzerland. Actually, the font received a facelift in 1983-the newer version is called, you guessed it, Neue Helvetica.

Helvetica even has its own movie . I haven’t seen it yet, but please comment in the section below if you have.

Besides its Hollywood (Indie) status, Helvetica is a font that looks great on both print and on screen.  Nature , Science , and Cell request that their figure labels be in Helvetica. (If you need assistance setting up figures, I’m here to help). It looks great small as in figure labels, and it looks pretty good in large formats as posters. I lost count of how many figures I labeled using Helvetica, since that’s what one of the publishers used for their books.

3. Baskerville- “Tends to have positive influence on readers”

Baskerville’s history goes all the way back to 1757 when John Baskerville designed a typeface that works well in print and easy to read.  Mr. Baskerville preferred his letters simple and refined. He was also a writing master, so he had some ornamental letters like the upper case Q.

There was an  informal study  (not official, but some experiments here and there) that showed using Baskerville font increased trustworthiness of the text compared to other fonts. In the same study, Comic Sans had the most negative influence on the readers.

Baskerville is a serif font, which means that there are “tails” at the edge of the letters. Generally, serif fonts are better suited for print. This font works best when used in long blocks of text. Try to keep this font between 8 and 14pts for best results. This font looks dignified, so use this for your important professional occasions-award ceremonies, recognitions, etc.

4. Caslon- “When in doubt, use Caslon”

Caslon is another font with a long history. William Cason I designed the typeface back in the early 1700’s. This font is considered as the first original typeface from England. This font was very popular in colonial America, and it was used for many historical documents including the US Declaration of Independence.

Caslon is a serif font (with tails), and is best used in blocks of text. Like Baskerville, try to keep this font between 8 and 14 points for best results. Using this in a report or an application would be a good places.

5. Garamond – “Second best font after Helvetica”

This font’s history also goes way back. The font was designed by Claude Garamond (or Jean Jannon), who was commissioned to make a typeface for King Francis I of France (1515-47) to be used in series of books. The modern, electric version was revived in 1989 by Robert Slimbach.

Because there are different sources available for Garamond, there are numbers of different variations of the font. Adobe Garamond is the most popular and widely-available version today.

Garamond is still used extensively by French publishers. They also insist that Garamond be printed in size 9.  Some of the most famous publications in France are in Garamond such as Histoire de l’édition français.  The publishers prefer this font “for its beauty, its richness and its legibility” combined with “an uncluttered graphic style that underscores the rigour of essays and analysis providing a radical critique of contemporary society”.

Garamond is a great font to be used in long proses such as textbooks, dissertations and theses. Keeping it at 9 point is optional. In fact, my master’s thesis was in Garamond.

So that’s the 5 fonts that add credibility and professionalism to your scientific research. Did you find your favorite fonts here? Do you have other favorites? Please share your thoughts in the comment section. Also, please feel free to send this article along to those who might benefit from this short article.

[bra_border_divider top=’10’ bottom=’10’]

Now that you know about great scientific fonts, learn more about: PowerPoint Tips for the Scientist

Sources and Further reading:

Arial vs Helvetica – fonts.com

Research on font trustworthiness: Baskerville vs. Comic Sans

Caslon typeface

History of Garamond

Cell Press Figure Guide

Nature -Guide to preparing final artwork

Science Magazine: Preparing your manuscript

14 Comments

I’d rather like to know which font was used to write that article – it’s simple and readable, better than all presented above.

And the font being used for that article is Helvetica, which is one of the fonts mentioned above 😀

Hi Ewa! Great point. The font used is called “Open Sans” by Steve Matteson. For my blog, I made the font color dark grey to make it easier on the eyes, and also made them slightly bigger than average for easier reading. Hope this helps!

Hollo there, i liked the article but none of this fonts looks like the one used in the papers i read, (Journals of the American Chemical Society), do you know which one they use?

Hi There! Thank you for the note! ACS suggests Arial and Helvetica for their journal figures, so that’s what I introduced in this article–for the text, they might very well have their own custom font they use for their publications. I’ll dig into this a little deeper–thank you again!

I’m sorry, but this article is full of misinformation. Part 1 is a reiteration of articles that have been around for years. Absolutely nothing new there, and honestly, is there anyone even considering the typefaces you name there for scientific articles? Is it conceivable that anyone would use Curlz for his essay?

But my real concern goes to the second part. Arial and Helvetica are absolutely not scientific typefaces. The notion that ACS suggests these typefaces doesn’t make them suitable for scientific works. I think you ought to do research as to WHY these typefaces came recommended. Helvetica has history, as it won out of contemporaries like Univers as Helvetica was very heavily marketed. As a side note, Helvetica is actually based on the Akzidenz Grotesk model. Arial was designed to have the same metrics as Helvetica so it could be used on the same printers without having to pay a license fee to use Helvetica. Arial is more legible while Helvetica is more neutral and clear, but neither is particularly great.

So I would say Helvetica and Arial haven’t been chosen because they’re perfect. They’ve been chosen because they’re popular, and Arial is on every Windows computer, so people don’t have to purchase any fonts. I would say neither Arial and Helvetica are known to be particularly good to read. I suspect typefaces like Proxima Nova and Avenir will fair better. To be clear, I don’t think Arial or Helvetica are bad choices for labels and such, but to suggest them as top 5 typefaces, that’s very clearly misinformation.

“When using Arial as figure legends, keep the font size small ~8 points for best results.” For best results? Not entirely. It’s probably a good estimate, but in actuality the pt size should depend on the layout. I would recommend always making a test print to see if the text looks good in print, if that’s what it is intended for. Sometimes 0.2pts more or less could make the difference.

“Helvetica is the most heavily-used font.” I don’t think so. First off, Helvetica is not a font. It’s a typeface. Helvetica Regular would be a font. Helvetica is the most heavily-used typeface in graphic design, and likely the most heavily-used sans typeface. It’s not the most heavily-used typeface. At least, I would be very surprised if it was. I suspect Times New Roman is the most heavily-used.

“The font was designed to be an easy-to-read font.” No, Helvetica was designed to steal the popularity of Akzidenz Grotesk away.

Also, follow this link to see some of the problems of Helvetica at small sizes, and what professionals in the field have to say about it: http://spiekermann.com/en/helvetica-sucks/

“Actually, the font received a facelift in 1983-the newer version is called, you guessed it, Neue Helvetica.” Who would guess that the prefix for the new Helvetica would be German though? Small detail… Anyway, if you like Helvetica but want a more professional typeface (because really, Max Miedinger was not a type designer and as far as I’m concerned that shows), I can recommend Neue Haas Grotesk (a typeface that is true to the original Helvetica, but improved) or Neue Haas Unica (a more fresh looking Helvetica that deviates from the original).

“Helvetica even has its own movie. I haven’t seen it yet, but please comment in the section below if you have.” I have seen it a few times now. It’s quite a pleasure to watch, but there’s a lot of propaganda involved as well. You have the likes of Massimo Vignelli drooling over how great Helvetica is. The man was a pretty great graphic designer (although insisting on always using Helvetica has little to do with graphic design, as one ought to select the perfect typeface for the job, not use one typeface for every job), but he had no insight in type design. On the other hand, you have Erik Spiekermann formulate perfectly what Helvetica stands for. I would say for a type designer the Helvetica documentary is quite pleasant to watch. For the layman I’m afraid the documentary amounts to propaganda. It gives the layman the feeling this is one of the best typefaces out there and it’s simply not, by far.

“Besides its Hollywood (Indie) status, Helvetica is a font that looks great on both print and on screen.” Absolutely not! On Windows computers, websites set in Helvetica tend to look horrendous. The problem is that Helvetica is not well hinted, and so rendering problems occur. Helvetica was obviously not designed for monitors. Neue Helvetica doesn’t have the rendering problem to the same extent I believe, but relatively few people have Neue Helvetica, so it wouldn’t be wise to use that on your website, unless you embed the fonts. For websites I highly recommend using Arial rather than Helvetica.

“Baskerville’s history goes all the way back to 1757 when John Baskerville designed a typeface that works well in print and easy to read.” Easy to read? Not particularly, though it’s not bad either. Baskerville is a transitional typeface, meaning the weight modulation is vertical and the contrast is high. This is the tradition of the Baroque, but it’s not the most pleasant to read. However, Baskerville does look quite academic. For typefaces that are more pleasant to read, I would look at the Garalde style. Garamond and Caslon belong to that classification. They have a diagonal weight modulation, which naturally leads the eyes to the next letters. Typefaces with vertical weight modulation and high contrast tend to feature a fence effect, which disturbs the reading experience. To see this effect well, look at Didone typefaces like Didot and Bodoni.

“This font works best when used in long blocks of text. Try to keep this font between 8 and 14pts for best results.” 14pt seems quite large. Try 9–12pt. This goes for any serif typeface to be used for body text that is intended for print (for the web try 10–14pt, also depending on which device it’s intended for). But again, it will depend on the layout, and always make test prints to make sure it’s pleasant to read.

“Garamond is a great font to be used in long proses such as textbooks, dissertations and theses. Keeping it at 9 point is optional. In fact, my master’s thesis was in Garamond.” I distinctly remember years ago I noticed my Harry Potter book was set in Garamond. Both Garamond and Caslon are still used extensively for books.

However, Garamond may be a bit much for scientific documents. It’s quite classical and it has a low x-height, which these days is not preferable. Caslon is a bit less expressive and has a taller x-height. I would say Caslon is probably better for scientific articles.

One group of typefaces that certainly seems to be missing here is Century. Typefaces like Century Roman and Century Schoolbook. They belong to the Clarendon classification and are reminiscent of typefaces like Baskerville. These typefaces have been popular since the late 19th century and are still used extensively in academic literature. But I suppose you should also make a consideration of whether your article should be about the most comfortable typefaces to read, or the best suitable for scientific work, because they most certainly don’t amount to the same thing, yet you seem to be equating the two in this article.

Hi Martin! Thank you so much for your in-depth note! I have to look over and digest all your excellent points. Would you be open to expanding your writing and be a guest author or send me a link to your website/blog so the readers can have more information about what types to use for their work?

THE quick brown fox jumps over the lazy dog!!!!!

Leelawadee is a bit underrated. It is easy on the eyes, and simple. It could use a bit of a TimesNewRoman-punch to it, though.

Where can I download Helvetica from? I couldn’t find it anywhere

Seriously? I don’t know what this smug guy does with typography, in which he seems to be well versed, but if he were to take up writing he would need to work on his grammar.

I’m not an expert on fonts, but I’m currently using Helvetica for headlines and other Sans text in my thesis and DejaVu for the main text. Feels pretty scientific to me 🙂

I enjoyed the historical aspect of this article. Thanks! PS. I see you use a sans serif font.

How i download these font types?

Stack Exchange Network

Stack Exchange network consists of 183 Q&A communities including Stack Overflow , the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

Q&A for work

Connect and share knowledge within a single location that is structured and easy to search.

What is the standard/recommended font to use in papers?

I looked around but did not find that anyone has asked this before, but what are the fonts that are standard/recommended while writing academic reports/papers?

• publications

• 19 No need to search for the perfect font. You just download the latex/word template that the journal / conference provides and you stick to it. –  Alexandros Commented Aug 7, 2014 at 10:12
• 3 In my case there isn't a template, that is the problem. –  Man Commented Aug 7, 2014 at 10:12
• 1 @O.R.Mapper yes very true, although I assume if the OP was looking for the standard font of every language in the world for academic publishing, we could close it as "too broad" –  user-2147482637 Commented Aug 7, 2014 at 15:35
• 10 People stick with the Computer Modern default in LaTeX so much that I once had someone tell me a paper where I intentionally chose a different serif font "looked unprofessional." –  Matt Reece Commented Aug 7, 2014 at 17:32
• 3 Please do not be "that person" who has the only paper in the journal or proceedings with a different font from the others. –  Max Commented Aug 8, 2014 at 8:42

4 Answers 4

If there's no template, then the choice is yours. However, you should make sure to pick a font that's easy to read. The usual standards in academia tend to be the Times, Helvetica/Arial, and Computer Modern families. This doesn't restrict you from using fonts like Book Antiqua, Myriad Pro, Goudy Old Style, or Garamond, but they're definitely not standard.

• 9 As to Helvetica/Arial: I think conventional wisdom is that serif fonts are preferred for large bodies of text, while sans serif should be reserved for short chunks like labels, headings, etc. I've certainly never seen a published paper set entirely in Helvetica. Then again, in my field everyone uses LaTeX, so unless you make a special effort, everything comes out in Computer Modern. –  Nate Eldredge Commented Aug 7, 2014 at 15:52
• @NateEldredge: You are correct that serif fonts are easier to handle in large doses, but Helvetica is the "default" font for most "official" documents and reports throughout most of Europe. And this extends to preprints when not done in LaTeX. –  aeismail Commented Aug 7, 2014 at 15:56
• 14 Eurghhhhhhhhhhh. –  Nate Eldredge Commented Aug 7, 2014 at 16:14
• @NateEldredge: This is not undisputed. @ aeismail: It’s rather Arial due that popular operating system (which does not make this any better; not because of serif vs. sans-serif, but because I do not want to see that font anymore to the extent that I tweaked my browser to auto-replace any resembling fonts). –  Wrzlprmft ♦ Commented Aug 8, 2014 at 8:35
• @Wrzlprmft: True, it is normally Arial that is specified; fortunately the differences are small enough that I use Helvetica and no one complains. (And actually I'm starting to see more references to Helvetica nowadays.) –  aeismail Commented Aug 8, 2014 at 12:00

For an academic paper each publisher journal have their standards. These do not affect or are affected by the manuscripts sent in to the journal. Some journals specify fonts, commonly standard Times Roman, for their manuscripts. If the journal specifies something, follow that specification. Otherwise use a font that is easy to read. There is no need to use anything but a standard font for whatever typesetting/word processor system.

There isn't any.

Focus on the content, write using your favorite writing software's default font, and let the journal's typesetting staff worry about the looks of the published version.

For the subset of journals that do not take care of typesetting, first make sure they are legitimate, then use the template they provide.

If no template is provided discuss with your supervisor and colleagues whether the journal is really worth your time, if it is then use your favorite software's default font.

As others have mentioned, the standard font varies, but is usually a serif font such as Times New Roman, although sans serif fonts such as Arial and Helvetica seem to be gaining traction as well. Their is major disagreement over which is easier to read--serif or sans serif fonts, with no clear consensus on the outcome. For example, see this paper .

Font size is typically twelve point. Follow the guidelines on this one, and make sure to keep your font consistent. Nothing is more likely to get you minus points than some obvious monkeying with the font size, whether to lengthen your manuscript (most commonly seen in undergrad papers) or to fit your text into the page limit (the rest of us!).

You must log in to answer this question.

Not the answer you're looking for browse other questions tagged publications writing formatting ..

• Featured on Meta
• Preventing unauthorized automated access to the network
• User activation: Learnings and opportunities
• Join Stack Overflow’s CEO and me for the first Stack IRL Community Event in...

Hot Network Questions

• Strange Occurrences When Using Titlesec and Section Title Begins with `L'
• How to fix bottom of stainless steel pot that has been separated from its main body?
• Does history possess the epistemological tools to establish the occurrence of an anomaly in the past that defies current scientific models?
• Why is my Lenovo ThinkPad running Ubuntu using the e1000e Ethernet driver?
• Is a 1500w inverter suitable for a 10a portable band saw?
• Do mathematicians care about the validity ("truth") of the axioms?
• Questions about using a public grill
• Is there a fast/clever way to return a logical vector if elements of a vector are in at least one interval?
• Evil machine/Alien entity kills man but his consciousness/brain remains alive within it, and he spends eons reading its mind to defeat it and escape
• How does Linux kernel use Intel SGX (Software Guard Extensions)?
• How do you measure exactly 31 minutes by burning the ropes?
• nicematrix \midrule undefined
• Taking out the film from the roll can it still work?
• In a shell script, how do i wait for a volume to be available?
• Why does Lebanon apparently lack aerial defenses?
• How can I make a 2D FTL-lane map on a galaxy-wide scale?
• Converting a set of reactions represented by strings separated by spaces to a list of similar strings
• How does adding twist to an elliptical distribution alter induced drag? Effect of twist on induced drag
• Are C3 and S3 operations equivalent for C3h point group?
• Five Hundred Cigarettes
• In the Silmarillion or the Appendices to ROTK, Do the Dwarves of Khazad-dûm know about the Balrog below prior to Durin receiving the ring?
• Informal "chats" with potential grad school advisors
• Best way to replace a not yet faild drive
• How to Organise/Present Built Worlds?

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

The PMC website is updating on October 15, 2024. Learn More or Try it out now .

• Advanced Search
• Journal List
• PLoS Comput Biol
• v.16(12); 2020 Dec

Ten simple rules for typographically appealing scientific texts

Lars ole schwen.

Fraunhofer Institute for Digital Medicine MEVIS, Bremen, Germany

Introduction

Text is ubiquitous in everyday scientific work—when was the last time you spent 5 minutes working without writing, reading, or interacting with any kind of equipment that had text (scales, labels, brand name, etc.) on it? Most forms of communicating ideas and findings in science are based on text, e.g., BSc/MSc/PhD theses, manuscript drafts, grant proposals, reports, or job applications. In addition, text appears in figures, (electronic) slides for presentations, and posters, i.e., in formats focused more strongly on a graphical presentation.

All these documents are usually written to convince the audience of the quality of your ideas or results, ultimately with the goal of a positive evaluation (grading, decision on funding/hiring, etc.). A good visual appearance of the text and graphical elements is key for making a good first impression on the audience. When sustaining this impression by clearly structured and well-written text, professional layout is again important because less-than-optimally typeset texts distract the audience from fully appreciating the high-quality content [ 1 ]. Even though single visual inconsistencies cost the readers only a fraction of a second, these interruptions to the flow of reading add up and subconsciously frustrate the readers, possibly undermining your credibility. Poor visual appearance and language can be spotted at first glance in Fig 1 , and incorrect content (or a confusing structure, not shown in Fig 1 ) take much longer to notice. Properly formatting text is particularly challenging in interdisciplinary fields like Computational Biology, where authors are faced with a variety of text elements, e.g., Greek characters, mathematical formulas, chemical formulas, and source code listings. Similar to inconsistent writing style, inconsistent formatting may indicate plagiarism, e.g., stray dashes resulting from copying and pasting hyphenated text, garbled characters, and fonts/formatting copied from the source.

Poor formatting, incorrect language, or wrong contents?

Scientists frequently need to produce final document layout themselves, either from scratch or based on a template—where some templates are well designed and others are, well, “designed.” If a template is given, fewer decisions need to be made, but some typographical knowledge is still helpful to understand the template and to deal with issues unforeseen therein. Ideally, the actual typesetting is subsequently done by trained professionals, e.g., working with publishers, who know what they are doing [ 2 ]. Submissions should, in this case, follow the publishers’ guidelines and templates, but still be prepared carefully, as “reviewers’ opinion about a manuscript can be skewed by careless formatting” [ 3 ]. Typography is thus one of the tools of the trade for scientists.

This article is meant as a practical guide for typesetting scientific texts, including motivation for the recommendations. While focusing on the intended layout, the rules also provide hints on how these results can be obtained in common text processing/typesetting tools (such as Microsoft Word/LibreOffice Writer, Google Docs, and LaTeX). These rules are meant to complement

• detailed typography textbooks or reference books [ 4 – 7 ] by providing hands-on recommendations for everyday scientific writing;
• software manuals (typically focused on features and how to achieve specific formatting) by explaining which formatting makes sense in which case;
• style manuals [ 8 – 10 ];
• tips for scientific writing [ 11 – 17 ] and collaboration tools [ 18 – 21 ]; and
• specialized recommendations for slides [ 22 , 23 ] and posters [ 24 , 25 ].

The rules primarily apply to English (specifically American English), and many of them also apply to other languages using the Latin alphabet and beyond. However, ligatures and diacritics (Rule 2), punctuation and its spacing (Rule 2), hyphenation (Rule 3), and number formatting (Rule 8) vary between languages.

Rule 1: Fonts—Choose a suitable (type)face for your work

Fonts should be chosen according to the intended function. Documents primarily consisting of text are usually typeset in serif fonts where letters end in horizontal lines (see Fig 2A ) guiding the readers’ eyes through the lines like a “railroad track” [ 26 ]. Moreover, serifs provide distinctive shapes of words ( Fig 2B ). This allows more easily reading text by fixing a few points in each line (saccades, [ 27 ]) rather than continuously reading each individual letter. These properties generally make serif fonts easily readable.

(A) Terminology to describe the “anatomy” of glyphs. (B, C) Samples of serif (B) and sans serif fonts (C), all of them nominally of the same size (but notice the differences in width, x versus ascender/descender height and overall apparent size). (D) Confusing use of fonts for a purpose they were not designed for.

In contrast, posters, slides, and figure annotations containing only little text and incomplete sentences require each word to be clearly legible. In this case, sans serif fonts are more suitable ( Fig 2C ). Nonproportional (typewriter-like) fonts where each glyph has the same width have a technical appearance and are used, e.g., for source code listings. Calligraphic, handwritten, or otherwise creative fonts may lack a serious appearance and should be used with care in scientific content, e.g., if a handwritten/sketched look is intended [ 28 ]. Besides the function, fonts can convey characteristics like elegant, modern, or traditional (see Fig 2D ) [ 29 ].

In 1 document, only as many fonts as necessary should be mixed. Fonts should be combined to complement each other with the intended level of contrast and with matching x height and length of ascenders/descenders. The main font for the text should include all required diacritics (e.g., for proper names), non-Latin characters (e.g., Greek), and symbols (e.g., arrows or for mathematical formulas), cf. Rule 2.

Rule 2: Individual characters and words—Get the details right

Text is composed of single characters including (uppercase and lowercase) letters, numbers, punctuation, characters with diacritics, and symbols. Typographically, however, text is composed of glyphs, representations of characters in a specific shape and design.

Certain combinations of letters appear differently when combined, forming so-called ligatures (e.g., the “fi” in the word fish in Fig 2A ). Ligatures enhance readability by avoiding visual gaps inside words and are examples of 1 glyph representing multiple characters.

Punctuation is used to structure sentences and should use correct glyphs (cf. Fig 3A ).

(A) Typographically correct symbols make a difference between sloppily written and conveniently readable texts. (B) Many language use the Latin alphabet combined with different types of diacritics and additional characters.

Quotation marks exist in 2 forms: straight/dumb (as typed on the keyboard) and typographic form. In English, raised 6/66 and 9/99 forms as shown in Fig 3A are used as opening and closing quotation marks, respectively, depending on whether you follow a style using single or double quotes. Punctuation is placed before or after closing quotation marks depending on whether it is part of the quote, except for periods and commas always placed before the closing quotation mark [ 10 ]. Apostrophes have the raised-9 form of a closing single quotation mark. Prime and double prime symbols are used, e.g., for feet/inches, arcminutes/arcseconds in geographic latitude and longitude (cf. Fig 3B ), and derivatives in mathematics and to indicate positions of carbon on ribose rings in molecular biology. Neither of these symbols should be confused with accents (see below).

Dashes come in 3 flavors. For hyphenation (see also Rule 3) and compound words, a standard dash (-) is used. The slightly longer en dash (–) is used for ranges (e.g., pages 24–33), sometimes as the symbol in bullet lists (see Rule 6), and to indicate naming after separate persons (e.g., the Michaelis–Menten reaction) as opposed to hyphenated names (e.g., 2008 Nobel laureate Françoise Barré-Sinoussi). The minus sign is typically similar to the en dash. The em dash—as shown here—is used as a phrase marker—or for adding afterthoughts. However, besides unspaced em dashes, spaced en dashes are also recommended for these purposes [ 7 ].

Accents and other diacritics (cf. Fig 3B ) may be complicated, in particular outside one’s native language. Still, they are worth getting right—imagine what a picky reviewer will think about your scientific work if you cited them, but did not even manage to spell their name correctly.

Correct symbols that cannot directly be typed can be selected/copied from a character table or entered via their respective Unicode code points. Both these options are tedious. Using defined macros or auto-correction features of the text processing software can be more convenient, but do not always work as intended and should be checked.

Rule 3: Lines and paragraphs—Keep the text flowing

Paragraphs consist of lines of text (see Rule 5 for a discussion of line width). Paragraphs can be typeset left-aligned, centered, right-aligned, or fully justified; cf. Fig 4A . Justifying text requires aligning both the left and right ends of lines, and this is commonly achieved by stretching the spacing between words. Paragraphs in continuous text are usually typeset justified. This is most convenient to read as paragraph breaks can be spotted easily, and there is no random graphical emphasis on words at the beginning or end of lines which are longer than the surrounding lines. Shorter pieces of text can also be typeset left-aligned, e.g., on posters and slides. Centered and right-aligned text is sometimes used for headings, displayed equations, or tables (cf. Rule 7). Such alignment is not suitable for longer texts as it makes finding the next line inconvenient ( Fig 4A ).

(A) Left-aligned text randomly emphasizes words appearing at the end of the line (indicated in orange); right-aligned text makes finding the next line unnecessarily difficult for the readers (indicated in blue); centered text combines both disadvantages; and justified text avoids these issues and has the calmest appearance. (B) Examples where hyphenation or line breaks interrupt the flow of reading (hyphenation examples from p. 115 in [ 30 ]). (C) Indenting the first line of paragraphs (except after headings) clearly indicates where a new paragraph starts, and this may be unclear at the top of a page otherwise.

Line breaks in paragraphs should not interrupt the flow of reading. To prevent undesired line breaks, e.g., between numbers and their unit ( Fig 4B ), non-breaking spaces should be used.

Words may need to be hyphenated to avoid large gaps in lines in justified text. Text should be hyphenated by the respective feature of the text processing/typesetting software. Automatic hyphenation usually works well if language settings are correct, but should be checked for misleading hyphenations ( Fig 4B ). Enforcing hyphenation by manually entering dashes and spaces/line breaks may lead to stray dashes when fur-ther editing the text.

The first line of paragraphs is frequently indented ( Fig 4C ) to clearly indicate that a new paragraph has started (except immediately after headings where indentation would be redundant). In contrast to vertically spacing paragraphs, indenting is also visible after a page break, below a figure, and after lists.

Alignment, indentation, and other formatting of paragraphs should not be applied manually for each paragraph, but via suitably defined paragraph or document styles. Ideally, this is provided by the document template.

Rule 4: Emphasize what is important, and only that

Not all words in a text are equally important, and some need to be distinguished visually. Visual emphasis, however, should not happen by accident (e.g., because a word happens to appear at the end of a line or because a symbol needs to be used from a different font). Instead, emphasis should result from a conscious decision, and a suitable and consistent way of formatting different types of importance should be used. The main purposes of increased visibility of words are.

• structuring (providing “entry points” on the page where one could start reading),
• emphasis (where stressing something only makes sense within the context), and
• markup (e.g., in bibliographies or for syntax highlighting in source code).

Typographically, there are different variants of highlighting ( Fig 5A ), ranging from subtle to highly prominent. The prominence of emphasis can be characterized by the change of “color” [ 7 ] (or “type color” [ 31 ]), i.e., how dark the page appears at some location when viewed out of focus. Larger changes of type color are more prominent highlighting and easier to spot when just glancing at the page/poster/slide. Italic (no change in type color) is usually the formatting of choice for emphasis within context. In contrast, bold (notable change in type color) is useful, e.g., for headings or terms defined in a glossary. Small caps (no change in type color) are sometimes used to distinguish family names from given names or real-world from model entities. Underlining used to be one of the few possibilities of emphasis using a typewriter (see Fig 5B ), but is neither particularly nice nor useful nowadays.

(A) Text in italics, small caps, or a matching alternative font does not change the type color of the page and emphasizes words within the context while reading. Bold text, uppercase letters, and different colors are more prominent and serve as “entry points” to the text. Using a contrasting alternative font, letter spacing, and underlining words forms an even stronger visual contrast, but is challenging to get looking good. (B) In the era of typewriters, authors were much more limited in using emphasis in their texts. (C) Italic, bold, and small caps should be used as properly designed font variants and not be faked by slanting (making the text look unnatural), making lines thicker (leading to, e.g., shrunken eyes and unbalanced spacing), or scaling capitals (making glyphs skinny). (Disclosure of image manipulation: text typed using a mechanical typewriter was digitized and edited for clarity, and color channels of the RGB image were manipulated to imitate red text from a 2-color ink ribbon).

Emphasis in continuous texts should be used sparingly. If 80% of a text is emphasized, actually the remaining 20% of the text are most visible. In contrast, text not meant to be read as a whole may profit from extensively combining different ways of highlighting, e.g., markup in bibliographies or syntax highlighting in source code listings.

Pitfalls of highlighting are shown in Fig 5C . Italic, bold, and small caps of a font should only be used if available as properly designed variants. Automatically created variants (slanting glyphs, using thicker lines, or shrinking uppercase letters) are of lower quality (“Frankensteinian manipulation” [ 32 ]) and best avoided.

To achieve consistent visual emphasis throughout a document, suitable styles or macros should be defined and used. Naming these by purpose rather than appearance makes it easy to consistently change formatting when editing and revising a document (cf. Rule 9).

Rule 5: Pages—Visually distribute your story

Unlike information on web pages, printed material and presentation slides are arranged on separate pages of fixed size. Contents thus need to be distributed with page breaks at useful locations (unless, of course, only a single page or a poster is needed). Besides text, also non-text material (figures, tables, and footnotes) needs to be positioned on pages.

For good readability, lines should not be longer than 75 to 80 characters [ 7 ] or require additional line spacing; otherwise, the readers’ eyes cannot easily jump from 1 line to the next. Reducing the margin width is thus not a good way to squeeze more content into a given number of pages. Also, margins are needed for the readers simply to hold the document without fingers covering part of the content and to take notes. Only little text such as page numbers should be placed in the margin (top outside, bottom outside, or bottom center). Two-column layout allows more readable text per page, but makes placing wide elements like figures or tables more complex. One-sided layout with page numbers at the bottom center is more robust if readers will likely print the document themselves and might not use duplexing or might print 2-on-1 (swapping left and right pages).

If not defined by a template, one easy way [ 33 ] to define page margins (cf. Fig 6A ) is to first determine how wide the text block needs to be to fit about 70 characters on average. The page is then divided into an n × n grid such that using 2 stripes of cells each as the left and right margins leaves the desired text width. One and 2 horizontal stripes are then used as the top and bottom margins, respectively. For 2-sided layout, each page should have only 1 stripe as the inner margin. In both cases, additional space for binding may need to be considered. For 12-point Cambria text on an A4-sized page, this construction results in n = 12 and margins of 35 mm, 25 mm, and 50 mm on the left/right, top, and bottom, respectively. In contrast, using a default setting of 1-inch margins for a letter-sized page containing 10-point Times New Roman text results in about 115 characters per line, too much for convenient reading.

(A) One way to construct page margins for 1-sided and 2-sided layouts, also considering the type of binding used (here: spiral binding with narrower inner margin—glue or sewn binding requires enlarging the inner margin). (B) Figures (or tables) are commonly placed at the top of a page (or on figure-only pages), but not in between the text. (C) Orphans and widows, single lines of text separated from the rest of their paragraph, should be avoided.

Besides the running text, documents contain “floating” objects like figures or tables. These also need to be placed on the pages, typically at the top or bottom or on figure-only pages, ideally close to where they are referenced; see Fig 6B . Placing figures inside the running text would interrupt reading and may cause distracting page breaks. Instead, presenting figures in a separate “thread” outside the continuous text also permits readers to just browse through the figures and quickly find what interests them.

Footnotes, as the name suggests, are placed at the bottom of the page where they are referenced (which, clearly, should be done automatically). Footnotes are useful for relevant information complementing the main text without interrupting its flow (e.g., translations), see below for an example. Sometimes (e.g., to make presentation slides self-contained), footnotes are also used for literature references.

When optimizing page breaks, no single lines should be separated from the rest of a paragraph; see Fig 6C . Such single lines at the bottom and top of a page are denoted as widows (“have no future”) and orphans (“have no past”), respectively [ 33 ]. (The previous sentence is an example where a footnote would make sense: This vivid terminology is also used in other languages, e.g., the German terms for widow and orphan are “Hurenkind” [politically correct translation: offspring of a person working in the world’s oldest profession] and “Schusterjunge” [shoemaker’s apprentice].)

Text processing/typesetting software can places figures and partially prevent orphans and widows automatically, but this may require additional fine-tuning. Tricks for optimizing page breaks include rephrasing the text to make a paragraph on the affected page 1 line longer or shorter; enlarging the page vertically or breaking the page a line earlier; and moving, enlarging, or shrinking figures.

Rule 6: Lists—Present some content in structured form

Not all textual information is best presented as complete sentences in continuous text. In particular, as few text as possible should be used on slides [ 22 , 23 ] and posters [ 24 , 25 ]. Also in longer written texts, some information is best presented in (sub-)structured lists, either unsorted (itemized/bulleted) or sorted (numbered) lists; see Fig 7 . The readability of lists may profit from manually optimizing line breaks, in particular on slides and posters.

(A) Hard-to-recognize list, (B) properly formatted unsorted list, and (C) properly formatted numbered list.

Numbered lists are most useful for step-by-step instructions or if some of the entries are referenced from elsewhere (“item 5c” is more convenient than “the third sub-item of the fifth item”). Other common types of structured lists are glossaries (alphabetically sorted definition of terms where readers should quickly find the term they are looking for) and bibliographies (which additionally require cross-referencing from the main text). Itemized and numbered lists should be formatted consistently, i.e., they should be entered as the appropriate type of list and not by manually entering bullets/numbers and indentation; see Fig 7 .

Particularly in bibliographies, it makes sense to conceptually distinguish content and layout. Here, the same information (author, title, journal, volume, year, etc.) should be printed in 1 consistent style (format, referencing from the text, and sorting). Using suitable reference management integrated with the text processing avoids manually formatting bibliographies.

Rule 7: Figures, plots, and tables—Do not neglect the text outside the continuous text

Typography is relevant not only for the continuous text, but also for text in figures, plots, and tables. Figures convey content in easy-to-grasp graphical form, and plots present data in visual form, whereas tables provide precise numbers. Creating high-quality and well-readable figures [ 28 , 34 – 39 ] can be challenging, but is worth spending effort; well-designed figures with self-contained captions telling the main story are a useful way of reaching hurried readers just browsing through your work [ 15 ] or starting reading by looking at figures [ 40 ]. In particular, a good graphical abstract [ 41 ] or concept figure [ 42 ] can attract readers (even though the impact on citations is unclear [ 43 ]).

Figures may contain different amounts of text that should be consistent with the main text not only in terminology, but also in terms of fonts and symbols. Figures are often created in separate software, so consistency may be challenging. However, the limited capability of software is not a convincing excuse for low-quality figures (cf. Fig 8A versus Fig 8B ), and malicious readers could interpret it as limited capability of the author.

(A) Poor-quality plot: numbers are hard to read, symbols are not displayed properly, and color provides no additional information (except that automatic spell checking marked part of the axis labels as wrong). (B) Same data, better plot quality. (C) Poor-quality table: excessive lines and hard-to-read numbers, even in the right-aligned column due to the footnote symbol and numerals of different width. (D) Same information, better table layout.

Table formatting includes proper column alignment. While text should be left-aligned in columns, numbers in columns can only be compared conveniently if printed right-aligned and written in numerals that are all of the same width (table figures). Tables should not include too many prominent lines to prevent the impression of a “prison cell” (cf. Fig 8C versus Fig 8D ). Instead, tables can be structured optically by moderate spacing, light shading of every other row, or light lines. Whitespace is useful for structuring contents [ 44 , 45 ], elsewhere as well, e.g., in figures and lists (cf. Rule 6).

Rule 8: Mathematical and chemical formulas—Do not let doubt enter the equation

Numbers should not only be correct, but should also be formatted appropriately. Numbers with more than 4 digits are grouped using commas between each group of 3 digits: 31,556,952. For decimal numbers, a period (“point”) is used as the decimal separator: 3.14. Following [ 10 ], ordinal numbers should be written as 1st, 2nd, 3rd, 4th, … without superscript letters. When reporting computer-generated results, notation like 5·10 −9 is easier to read than pasting 5e−9 verbatim (and shows that you know what the “e” stands for).

Formulas provide precise information in a very condensed form. They are difficult to get right in the first place, and incorrect typesetting can alter the meaning: consider, e.g., 2 3 = 8 versus 23, or the isotope 14 C versus 14 carbon atoms. Formulas are a particular example where correct typesetting is indispensable to show you understood what you have written. Shorter and simpler formulas can be included “inline” in the text ( Fig 9A and 9B ). In this case, font, font size, and the base line should match the surrounding text. More complex formulas, those to be cross-referenced by number or formulas too high to fit in the text without modified line spacing, are better written as displayed formulas ( Fig 9C and 9D ). From a grammar and punctuation perspective, also displayed formulas should be considered part of the sentences in the containing text. Depending on the text processing software used, formulas can be entered via math syntax or equation editors or (e.g., in case of complex chemical formulas) may need to be created in external software and imported as images.

(A versus B) Formulas in the text should use a font matching the text and match the baseline of the text. Mathematical variables should be typeset in italic, unlike text parts of formulas or certain functions. (C versus D) Similarly, displayed formulas should match the surrounding text and are easier to understand if properly aligned. (E) Chemical formulas include subscript and superscript indices around symbols for chemical elements.

In formulas, mathematical variables are commonly typeset in italic. However, mathematical functions like sin (sine), text (including, e.g., abbreviations in indices), units, chemical elements, and certain constants should not appear in italic ( Fig 9B, 9D, and 9E ). To make longer formulas easier to read, proper alignment and grouped brackets of matching size are helpful ( Fig 9D ).

Rule 9: Use templates and styles for automatic and consistent formatting

When writing texts, unfinished layout may distract from content and structure. However, these topics should be addressed and concentrated on first, see Rule 10. Using software like Microsoft Word, LibreOffice Writer, or Google Docs that uses the “what you see is what you get” principle, layout needs to be ignored actively, unless a structure view, disabled page preview, or similar is used. Writing text in markup languages (e.g., Markdown or LaTeX using “what you see is what you mean”) makes the separation of content/structure and format/layout easier, but requires more technological affinity.

Structure in texts should be defined by styles/macros declaring, e.g., a section heading as a “level 1 heading” rather than manually numbering it, formatting it to a specific font size in bold with additional line spacing, making sure it is not followed by a page break, etc.; see Fig 10 . Properly structuring in this way also permits automatically creating a table of contents, cross-referencing to section numbers without keeping them up to date manually, automatically using the same style, or conveniently switching the style if the template is changed. Similarly, figures and tables with captions should be included as such objects so that they can be positioned automatically at the top/bottom or on separate pages, again with the side effect of automatic numbering and cross-referencing.

(A versus B) Marking headings as the appropriate level of headings (instead of manually formatting it bold and larger) ensures consistent layout (Google Docs example). (C) Using automatically numbered headings and proper cross-references (rather than manually entering it) allows keeping them up to date automatically (Microsoft Word example). (D) Using a macro name indicating its purpose (rather than having to remember the formatting for a specific purpose) makes writing easier (LaTeX example).

Rule 10: Iterative writing and typesetting—Do first things first and last things last

Formatting manuscripts is an iterative process, just like writing the contents [ 12 , 16 ]. When drafting contents at an early stage of the writing process, it only makes sense to pay attention to typographic issues that will likely be missed or cause problems/increased efforts later. This includes proper structuring, cross-referencing, and using template styles/macros. When editing the text later on, effort should be invested in those parts to be kept in the final manuscript. Issues relevant at this stage include, e.g., the contents of proper formulas, tables, and figures. Only when the contents have been finalized, it makes sense to polish the layout by optimizing line or page breaks and figure placement. Prematurely polishing either language or layout of parts of text that are deleted later is wasted effort.

Solitary and collaborative [ 18 , 20 ] writing may use a different format/platform than the one used for formatting and finalizing the submission, e.g., one may collaborate via a Google Doc or via Markdown files in a Git repository followed by finalizing the layout in LibreOffice Writer or LaTeX. Moreover, input from one or different authors needs to be unified also on a technical level, regardless of the technical platform used. Enough time should be planned for the work needed to turn finalized content into a formatted document ready for submission.

Acknowledgments

The author would like to thank the organizers of CdE-SommerAkademie 2017 and the participants of the “Getting Things Finished” workshop for providing an inspiring environment where he wrote a substantial part of this manuscript. Moreover, the author would like to acknowledge Simon Kempny for fruitful discussions about a draft of this manuscript.

Funding Statement

The author did not receive funding for preparing this manuscript.

• How it works

What Is The Best Font For A Dissertation?

Published by Alvin Nicolas at April 9th, 2024 , Revised On April 9, 2024

For many students, embarking on a dissertation is a daunting task. Beyond the research, writing, and analysis , a seemingly insignificant detail can cause unexpected stress: font selection. While it might seem like a minor concern, the right font can significantly impact the readability, professionalism, and overall look of your dissertation and can highly influence the decision of the readers. 

This blog will help you in choosing the right font for your dissertation. Let’s explore!

Why Does Font Choice Matter?

While the content of your dissertation is paramount, the presentation also plays a crucial role. The chosen font can influence how easily your reader absorbs the information. A poorly chosen font can lead to eye strain, reduced comprehension, and even a negative first impression.

Here are some specific reasons why font choice matters:

• Readability: The primary function of your dissertation is to communicate your research effectively. A clear and readable font is essential for ensuring your reader can easily grasp the information presented.
• Professionalism: Certain fonts convey a sense of seriousness and formality, aligning with the academic tone of your dissertation.
• Consistency: Maintaining a consistent font throughout your dissertation creates a sense of unity and professionalism.

Key Factors To Consider When Choosing A Font

Before discussing the specific font recommendations, let’s explore some key factors to consider when making your decision:

University Guidelines

Many universities have specific guidelines regarding font choices for dissertations. Always refer to your university’s style guide or handbook to ensure you adhere to any established requirements.

Readability

Opt for fonts with clear letterforms, adequate spacing, and sufficient contrast between the font and background colour. Avoid decorative or script fonts that can be challenging to read.

Serif Vs Sans-Serif

Serif fonts, characterised by small lines extending from the ends of characters (e.g., Times New Roman), are generally considered more readable for extended reading, making them ideal for the body text of your dissertation. Sans-serif fonts lacking these serifs (e.g., Arial) can be suitable for headings or short text snippets.

Font Size & Line Spacing

Maintain a comfortable reading experience with an appropriate font size (typically 10-12 points) and line spacing (usually 1.15 or 1.5 lines).

Hire an Expert Writer

Proposal and dissertation orders completed by our expert writers are

• Formally drafted in academic style
• Plagiarism free
• 100% Confidential
• Never Resold
• Include unlimited free revisions
• Completed to match exact client requirements

Popular Font Choices For Dissertations

Now, let’s explore some popular font options that meet the criteria for dissertation writing:

Times New Roman

The classic academic font, Times New Roman, remains a widely accepted and safe choice for dissertations due to its readability and formal appearance.

Similar to Times New Roman, Georgia offers good readability with a slightly wider design, making it suitable for screen-based reading.

This elegant serif font adds a touch of sophistication while maintaining excellent readability.

A modern serif font, Cambria provides a clean and professional look often favoured for on-screen reading.

While not ideal for the body text due to its lack of serifs, Arial can be a good choice for headings and subheadings due to its clarity and clean lines.

Additional Tips for Font Selection

Here are some additional tips to ensure your font choice shines:

• Consistency is key: Maintain the same font throughout your dissertation, including body text, headings, subheadings, and captions.
• Avoid excessive font variations: Stick to one or two fonts, with variations reserved for specific purposes (e.g., different fonts for headings).
• Consider the overall design: Ensure your chosen font complements the overall visual style of your dissertation, including layout and graphics.

Frequently Asked Questions

What font should i use for my dissertation uk.

Use a clear and readable font like Times New Roman, Arial, or Calibri for a UK dissertation. Most universities recommend a serif font like Times New Roman, size 12, for the main text, with clear distinctions for headings and subheadings. Always follow your institution’s guidelines for formatting and font selection.

What font should a dissertation be in?

Use a legible serif font such as Times New Roman, Arial, or Calibri for a dissertation. Typically, the font size should be 12 points for the main text, with variations for headings and subheadings as specified by your institution’s guidelines. Consistency and readability are key for academic documents.

What size font should my dissertation be?

Your dissertation’s main text should generally be in a 12-point font size for readability and consistency. Headings and subheadings may vary, typically larger than the main text, to emphasise hierarchy and organisation. Always adhere to your institution’s specific formatting requirements for font sizes and styles to ensure compliance.

What font shall I use for my undergraduate dissertation?

For an undergraduate dissertation, using a clear and legible font like Times New Roman, Arial, or Calibri is advisable. Aim for a font size of 12 points for the main text to ensure readability. Follow any specific formatting guidelines your university or department provides for consistency and professional presentation.

You May Also Like

This blog gives a breakdown of how much a dissertation costs. An insight into both if you write it yourself or get help from expert services.

Elevate your professional profile with the CapCut Creative Suite! Craft compelling video resumes that captivate employers in the job market.

Discover the factors influencing dissertation length and find guidance on typical page ranges for shorter, average, and longer dissertations.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

View the latest institution tables

View the latest country/territory tables

Calibri vs Garamond: Can font choice make or break a research paper?

What your preference says about you.

Helen Robertson

Credit: Markus Spiske/Unsplash

19 June 2020

Markus Spiske/Unsplash

From Times New Roman to Garamond to Cambria, many authors and editors have a preferred font. But does it make a difference when submitting a paper to a journal?

It’s true that a manuscript should be judged on its scientific merit, not on the way it’s presented. But it’s also true that a well-formatted manuscript is more likely to give a good first impression to an editor or reviewer.

Fonts tend to evoke passionate opinions , because appear to have personalities – from serious to comic or gothic. It’s possible that, consciously or not, readers might associate the font choice with the personality or intent of the author.

Jesse Meyer, a postdoctoral fellow at the University of Wisconsin-Madison, says he was “overwhelmed” by the heat it generated when he took the topic to Twitter .

The sans-serif font, Calibri, for example, was revealed to be particularly divisive:

Because calibri is ugly. Anything is >> calibri. — Dr. Jessika (@famplanfan) April 30, 2020

Calibri is evil- no idea who thought it should be the Word default font- to me, anything written in calibri screams “I just didn’t care enough to use a reasonable font”- HATE IT (and my lab will back ne up if anyone doubts my vehemence on this topic! — Anita Corbett- VOTE EARLY (She/her) (@acorbe2) May 1, 2020

I use Calibri default as it is the default so avoids any judgement on the font choice, but now I see that using the default creates judgement that I'm too lazy to change the font! 🙃 — Harriet Johnson (@harrietfjohnson) May 1, 2020

Don't stand out for the wrong reasons

So, why is font choice so important to some people?

Kristina Gill, an archaeobotanist and archaeologist at the University of Oregon, believes that typeface should vary between formats.

For manuscript submission, she favours Times New Roman or Garamond, “which is a little more open and easier to read”. For presentations and posters, she prefers Calibri, which she says is easier to read at a distance.

Charlotte Flatebo, an applied physics PhD candidate from Rice University says “you can’t control how your research will work”, but you can control how you present your manuscript. “It’s a little piece of victory.”

For journal submission, don’t overthink it. It defies logic that a journal would reject a manuscript on the basis of typeface alone.

Many journals have no specific requirements regarding format for submission, so if you prefer to write in a particular typeface – within reasonably standard fonts – it’s probably not going to hinder the likelihood of your paper being sent for review.

In fact, the common message from editors is that font choice doesn’t matter, unless it’s really noticeable.

“If your font draws attention to itself, it’s the wrong font,” says Andrew Bissette, senior editor at Communications Chemistry , a journal published by Springer Nature, which also publishes Nature Index. “Your reader should be thinking about your argument, not your presentation.”

Focus on formatting

It’s more important, says Bissette, to focus on “good paragraph structure, clear design of figures, and sensible spacing between lines and paragraphs”.

In other words, font choice is probably an unnecessary concern.

Something that many journals do consider very carefully, however, is the type of font they publish in.

Historically, journals were read as physical copies; now, the vast majority of researchers read academic papers online. Trends in journal fonts clearly reflect this shift from print to digital.

For example, the new Nature typeface , launched in October 2019, was designed specifically for scientific writing, to accommodate the needs of technical content including equations, formulae and symbols while also optimizing readability on a small screen.

According to Nature creative director Kelly Krause: “We aimed for an overall impression of calm, rational intelligence with perhaps a dash of British formality and wit.”

So while the context of the writing can be an important consideration in typeface choice, for an individual researcher, it is mainly a question of personal preference.

Sign up to the Nature Index newsletter

Get regular news, analysis and data insights from the editorial team delivered to your inbox.

• Sign up to receive the Nature Index newsletter. I agree my information will be processed in accordance with the Nature and Springer Nature Limited Privacy Policy .

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

13.1 Formatting a Research Paper

Learning objectives.

• Identify the major components of a research paper written using American Psychological Association (APA) style.
• Apply general APA style and formatting conventions in a research paper.

In this chapter, you will learn how to use APA style , the documentation and formatting style followed by the American Psychological Association, as well as MLA style , from the Modern Language Association. There are a few major formatting styles used in academic texts, including AMA, Chicago, and Turabian:

• AMA (American Medical Association) for medicine, health, and biological sciences
• APA (American Psychological Association) for education, psychology, and the social sciences
• Chicago—a common style used in everyday publications like magazines, newspapers, and books
• MLA (Modern Language Association) for English, literature, arts, and humanities
• Turabian—another common style designed for its universal application across all subjects and disciplines

While all the formatting and citation styles have their own use and applications, in this chapter we focus our attention on the two styles you are most likely to use in your academic studies: APA and MLA.

If you find that the rules of proper source documentation are difficult to keep straight, you are not alone. Writing a good research paper is, in and of itself, a major intellectual challenge. Having to follow detailed citation and formatting guidelines as well may seem like just one more task to add to an already-too-long list of requirements.

Following these guidelines, however, serves several important purposes. First, it signals to your readers that your paper should be taken seriously as a student’s contribution to a given academic or professional field; it is the literary equivalent of wearing a tailored suit to a job interview. Second, it shows that you respect other people’s work enough to give them proper credit for it. Finally, it helps your reader find additional materials if he or she wishes to learn more about your topic.

Furthermore, producing a letter-perfect APA-style paper need not be burdensome. Yes, it requires careful attention to detail. However, you can simplify the process if you keep these broad guidelines in mind:

• Work ahead whenever you can. Chapter 11 “Writing from Research: What Will I Learn?” includes tips for keeping track of your sources early in the research process, which will save time later on.
• Get it right the first time. Apply APA guidelines as you write, so you will not have much to correct during the editing stage. Again, putting in a little extra time early on can save time later.
• Use the resources available to you. In addition to the guidelines provided in this chapter, you may wish to consult the APA website at http://www.apa.org or the Purdue University Online Writing lab at http://owl.english.purdue.edu , which regularly updates its online style guidelines.

General Formatting Guidelines

This chapter provides detailed guidelines for using the citation and formatting conventions developed by the American Psychological Association, or APA. Writers in disciplines as diverse as astrophysics, biology, psychology, and education follow APA style. The major components of a paper written in APA style are listed in the following box.

These are the major components of an APA-style paper:

Body, which includes the following:

• Headings and, if necessary, subheadings to organize the content
• In-text citations of research sources
• References page

All these components must be saved in one document, not as separate documents.

The title page of your paper includes the following information:

• Title of the paper
• Author’s name
• Name of the institution with which the author is affiliated
• Header at the top of the page with the paper title (in capital letters) and the page number (If the title is lengthy, you may use a shortened form of it in the header.)

List the first three elements in the order given in the previous list, centered about one third of the way down from the top of the page. Use the headers and footers tool of your word-processing program to add the header, with the title text at the left and the page number in the upper-right corner. Your title page should look like the following example.

The next page of your paper provides an abstract , or brief summary of your findings. An abstract does not need to be provided in every paper, but an abstract should be used in papers that include a hypothesis. A good abstract is concise—about one hundred fifty to two hundred fifty words—and is written in an objective, impersonal style. Your writing voice will not be as apparent here as in the body of your paper. When writing the abstract, take a just-the-facts approach, and summarize your research question and your findings in a few sentences.

In Chapter 12 “Writing a Research Paper” , you read a paper written by a student named Jorge, who researched the effectiveness of low-carbohydrate diets. Read Jorge’s abstract. Note how it sums up the major ideas in his paper without going into excessive detail.

Write an abstract summarizing your paper. Briefly introduce the topic, state your findings, and sum up what conclusions you can draw from your research. Use the word count feature of your word-processing program to make sure your abstract does not exceed one hundred fifty words.

Depending on your field of study, you may sometimes write research papers that present extensive primary research, such as your own experiment or survey. In your abstract, summarize your research question and your findings, and briefly indicate how your study relates to prior research in the field.

Margins, Pagination, and Headings

APA style requirements also address specific formatting concerns, such as margins, pagination, and heading styles, within the body of the paper. Review the following APA guidelines.

Use these general guidelines to format the paper:

• Set the top, bottom, and side margins of your paper at 1 inch.
• Use double-spaced text throughout your paper.
• Use a standard font, such as Times New Roman or Arial, in a legible size (10- to 12-point).
• Use continuous pagination throughout the paper, including the title page and the references section. Page numbers appear flush right within your header.
• Section headings and subsection headings within the body of your paper use different types of formatting depending on the level of information you are presenting. Additional details from Jorge’s paper are provided.

Begin formatting the final draft of your paper according to APA guidelines. You may work with an existing document or set up a new document if you choose. Include the following:

• Your title page
• The abstract you created in Note 13.8 “Exercise 1”
• Correct headers and page numbers for your title page and abstract

APA style uses section headings to organize information, making it easy for the reader to follow the writer’s train of thought and to know immediately what major topics are covered. Depending on the length and complexity of the paper, its major sections may also be divided into subsections, sub-subsections, and so on. These smaller sections, in turn, use different heading styles to indicate different levels of information. In essence, you are using headings to create a hierarchy of information.

The following heading styles used in APA formatting are listed in order of greatest to least importance:

• Section headings use centered, boldface type. Headings use title case, with important words in the heading capitalized.
• Subsection headings use left-aligned, boldface type. Headings use title case.
• The third level uses left-aligned, indented, boldface type. Headings use a capital letter only for the first word, and they end in a period.
• The fourth level follows the same style used for the previous level, but the headings are boldfaced and italicized.
• The fifth level follows the same style used for the previous level, but the headings are italicized and not boldfaced.

Visually, the hierarchy of information is organized as indicated in Table 13.1 “Section Headings” .

Table 13.1 Section Headings

A college research paper may not use all the heading levels shown in Table 13.1 “Section Headings” , but you are likely to encounter them in academic journal articles that use APA style. For a brief paper, you may find that level 1 headings suffice. Longer or more complex papers may need level 2 headings or other lower-level headings to organize information clearly. Use your outline to craft your major section headings and determine whether any subtopics are substantial enough to require additional levels of headings.

Working with the document you developed in Note 13.11 “Exercise 2” , begin setting up the heading structure of the final draft of your research paper according to APA guidelines. Include your title and at least two to three major section headings, and follow the formatting guidelines provided above. If your major sections should be broken into subsections, add those headings as well. Use your outline to help you.

Because Jorge used only level 1 headings, his Exercise 3 would look like the following:

Citation Guidelines

In-text citations.

Throughout the body of your paper, include a citation whenever you quote or paraphrase material from your research sources. As you learned in Chapter 11 “Writing from Research: What Will I Learn?” , the purpose of citations is twofold: to give credit to others for their ideas and to allow your reader to follow up and learn more about the topic if desired. Your in-text citations provide basic information about your source; each source you cite will have a longer entry in the references section that provides more detailed information.

In-text citations must provide the name of the author or authors and the year the source was published. (When a given source does not list an individual author, you may provide the source title or the name of the organization that published the material instead.) When directly quoting a source, it is also required that you include the page number where the quote appears in your citation.

This information may be included within the sentence or in a parenthetical reference at the end of the sentence, as in these examples.

Epstein (2010) points out that “junk food cannot be considered addictive in the same way that we think of psychoactive drugs as addictive” (p. 137).

Here, the writer names the source author when introducing the quote and provides the publication date in parentheses after the author’s name. The page number appears in parentheses after the closing quotation marks and before the period that ends the sentence.

Addiction researchers caution that “junk food cannot be considered addictive in the same way that we think of psychoactive drugs as addictive” (Epstein, 2010, p. 137).

Here, the writer provides a parenthetical citation at the end of the sentence that includes the author’s name, the year of publication, and the page number separated by commas. Again, the parenthetical citation is placed after the closing quotation marks and before the period at the end of the sentence.

As noted in the book Junk Food, Junk Science (Epstein, 2010, p. 137), “junk food cannot be considered addictive in the same way that we think of psychoactive drugs as addictive.”

Here, the writer chose to mention the source title in the sentence (an optional piece of information to include) and followed the title with a parenthetical citation. Note that the parenthetical citation is placed before the comma that signals the end of the introductory phrase.

David Epstein’s book Junk Food, Junk Science (2010) pointed out that “junk food cannot be considered addictive in the same way that we think of psychoactive drugs as addictive” (p. 137).

Another variation is to introduce the author and the source title in your sentence and include the publication date and page number in parentheses within the sentence or at the end of the sentence. As long as you have included the essential information, you can choose the option that works best for that particular sentence and source.

Citing a book with a single author is usually a straightforward task. Of course, your research may require that you cite many other types of sources, such as books or articles with more than one author or sources with no individual author listed. You may also need to cite sources available in both print and online and nonprint sources, such as websites and personal interviews. Chapter 13 “APA and MLA Documentation and Formatting” , Section 13.2 “Citing and Referencing Techniques” and Section 13.3 “Creating a References Section” provide extensive guidelines for citing a variety of source types.

Writing at Work

APA is just one of several different styles with its own guidelines for documentation, formatting, and language usage. Depending on your field of interest, you may be exposed to additional styles, such as the following:

• MLA style. Determined by the Modern Languages Association and used for papers in literature, languages, and other disciplines in the humanities.
• Chicago style. Outlined in the Chicago Manual of Style and sometimes used for papers in the humanities and the sciences; many professional organizations use this style for publications as well.
• Associated Press (AP) style. Used by professional journalists.

References List

The brief citations included in the body of your paper correspond to the more detailed citations provided at the end of the paper in the references section. In-text citations provide basic information—the author’s name, the publication date, and the page number if necessary—while the references section provides more extensive bibliographical information. Again, this information allows your reader to follow up on the sources you cited and do additional reading about the topic if desired.

The specific format of entries in the list of references varies slightly for different source types, but the entries generally include the following information:

• The name(s) of the author(s) or institution that wrote the source
• The year of publication and, where applicable, the exact date of publication
• The full title of the source
• For books, the city of publication
• For articles or essays, the name of the periodical or book in which the article or essay appears
• For magazine and journal articles, the volume number, issue number, and pages where the article appears
• For sources on the web, the URL where the source is located

The references page is double spaced and lists entries in alphabetical order by the author’s last name. If an entry continues for more than one line, the second line and each subsequent line are indented five spaces. Review the following example. ( Chapter 13 “APA and MLA Documentation and Formatting” , Section 13.3 “Creating a References Section” provides extensive guidelines for formatting reference entries for different types of sources.)

In APA style, book and article titles are formatted in sentence case, not title case. Sentence case means that only the first word is capitalized, along with any proper nouns.

Key Takeaways

• Following proper citation and formatting guidelines helps writers ensure that their work will be taken seriously, give proper credit to other authors for their work, and provide valuable information to readers.
• Working ahead and taking care to cite sources correctly the first time are ways writers can save time during the editing stage of writing a research paper.
• APA papers usually include an abstract that concisely summarizes the paper.
• APA papers use a specific headings structure to provide a clear hierarchy of information.
• In APA papers, in-text citations usually include the name(s) of the author(s) and the year of publication.
• In-text citations correspond to entries in the references section, which provide detailed bibliographical information about a source.

Writing for Success Copyright © 2015 by University of Minnesota is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License , except where otherwise noted.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Research paper
• Research Paper Format | APA, MLA, & Chicago Templates

Research Paper Format | APA, MLA, & Chicago Templates

Published on November 19, 2022 by Jack Caulfield . Revised on January 20, 2023.

The formatting of a research paper is different depending on which style guide you’re following. In addition to citations , APA, MLA, and Chicago provide format guidelines for things like font choices, page layout, format of headings and the format of the reference page.

Scribbr offers free Microsoft Word templates for the most common formats. Simply download and get started on your paper.

APA |  MLA | Chicago author-date | Chicago notes & bibliography

• Generate an automatic table of contents
• Generate a list of tables and figures
• Ensure consistent paragraph formatting
• Insert page numbering

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

Formatting an apa paper, formatting an mla paper, formatting a chicago paper, frequently asked questions about research paper formatting.

The main guidelines for formatting a paper in APA Style are as follows:

• Use a standard font like 12 pt Times New Roman or 11 pt Arial.
• Set 1 inch page margins.
• Apply double line spacing.
• If submitting for publication, insert a APA running head on every page.
• Indent every new paragraph ½ inch.

Watch the video below for a quick guide to setting up the format in Google Docs.

The image below shows how to format an APA Style title page for a student paper.

Running head

If you are submitting a paper for publication, APA requires you to include a running head on each page. The image below shows you how this should be formatted.

For student papers, no running head is required unless you have been instructed to include one.

APA provides guidelines for formatting up to five levels of heading within your paper. Level 1 headings are the most general, level 5 the most specific.

Reference page

APA Style citation requires (author-date) APA in-text citations throughout the text and an APA Style reference page at the end. The image below shows how the reference page should be formatted.

Note that the format of reference entries is different depending on the source type. You can easily create your citations and reference list using the free APA Citation Generator.

Generate APA citations for free

Scribbr Citation Checker New

The AI-powered Citation Checker helps you avoid common mistakes such as:

• Missing commas and periods
• Incorrect usage of “et al.”
• Ampersands (&) in narrative citations
• Missing reference entries

The main guidelines for writing an MLA style paper are as follows:

• Use an easily readable font like 12 pt Times New Roman.
• Use title case capitalization for headings .

Check out the video below to see how to set up the format in Google Docs.

On the first page of an MLA paper, a heading appears above your title, featuring some key information:

• Your full name
• Your instructor’s or supervisor’s name
• The course name or number
• The due date of the assignment

Page header

A header appears at the top of each page in your paper, including your surname and the page number.

Works Cited page

MLA in-text citations appear wherever you refer to a source in your text. The MLA Works Cited page appears at the end of your text, listing all the sources used. It is formatted as shown below.

You can easily create your MLA citations and save your Works Cited list with the free MLA Citation Generator.

Generate MLA citations for free

The main guidelines for writing a paper in Chicago style (also known as Turabian style) are:

• Use a standard font like 12 pt Times New Roman.
• Use 1 inch margins or larger.
• Place page numbers in the top right or bottom center.

Chicago doesn’t require a title page , but if you want to include one, Turabian (based on Chicago) presents some guidelines. Lay out the title page as shown below.

Bibliography or reference list

Chicago offers two citation styles : author-date citations plus a reference list, or footnote citations plus a bibliography. Choose one style or the other and use it consistently.

The reference list or bibliography appears at the end of the paper. Both styles present this page similarly in terms of formatting, as shown below.

To format a paper in APA Style , follow these guidelines:

• Use a standard font like 12 pt Times New Roman or 11 pt Arial
• Set 1 inch page margins
• Apply double line spacing
• Include a title page
• If submitting for publication, insert a running head on every page
• Indent every new paragraph ½ inch
• Apply APA heading styles
• Cite your sources with APA in-text citations
• List all sources cited on a reference page at the end

The main guidelines for formatting a paper in MLA style are as follows:

• Use an easily readable font like 12 pt Times New Roman
• Include a four-line MLA heading on the first page
• Center the paper’s title
• Use title case capitalization for headings
• Cite your sources with MLA in-text citations
• List all sources cited on a Works Cited page at the end

The main guidelines for formatting a paper in Chicago style are to:

• Use a standard font like 12 pt Times New Roman
• Use 1 inch margins or larger
• Place page numbers in the top right or bottom center
• Cite your sources with author-date citations or Chicago footnotes
• Include a bibliography or reference list

To automatically generate accurate Chicago references, you can use Scribbr’s free Chicago reference generator .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

Caulfield, J. (2023, January 20). Research Paper Format | APA, MLA, & Chicago Templates. Scribbr. Retrieved September 27, 2024, from https://www.scribbr.com/research-paper/research-paper-format/

Is this article helpful?

Jack Caulfield

Other students also liked, apa format for academic papers and essays, mla format for academic papers and essays, chicago style format for papers | requirements & examples, "i thought ai proofreading was useless but..".

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

• Have your assignments done by seasoned writers. 24/7
• Contact us:
• +1 (213) 221-0069
• [email protected]

Best Research Paper Font and Size: Best Styles for an Essay

The Best Word Font in Research Paper

As you edit and polish your research paper, you should know the suitable font when formatting. Many students struggle to locate suitable fonts that are appropriate for academia. Thankfully, most of the writing styles such as APA or MLA end this frustration by indicating the right fonts to use in your work.

Many instructors indicate the type of fonts students should use in their assignments. That is because some fonts are large hence prompting one to use more pages than indicated in the instructions section.

People Also Read: Can Dissertation be a Case Study: Research Example and Format

Best Font for Research Paper

The choice of fonts can affect your academic writing work. The right font should make your work remain credible and professional. Dressing your work with the right fonts is procuring a suitable image.

Ideally, the best font for a research paper is Times New Roman as it is clear and most requested by university and college faculties. Other common ones are the Arial and Calibri fonts, which are preferred because of their large size compared with New Times Roman.

Some fonts can be attractive but hard to read because they have several curls and curves.

When handling research work, use the correct font which has enough allowance between letters to avoid overcrowding.

The professional fonts should be easy to read. The good news for you is that Times New Roman is a popular choice for academic documents.

It is the safest option because most examiners are comfortable with it. Notably, New Times Roman has sound APA support.

People Also Read: Can a Research Paper be Opinionated: Persuasive or Personal

Best Font Size for Research Paper

The best font size for a research paper is point 12. This size is the most common one, especially for New Times Roman, Arial, or Calibri fonts. The size of the fonts should make your work to be readable without straining the audience. We measure size using ‘points’.

Most academic research papers use MLA, APA, and Harvard references and formats.

The point is a percentage of the screen that the font is occupying. For academic papers, the recommended size is 12 points. It is the most comfortable size for the audience without looking oversized or bulky.

 The font size plays a critical role in making your research work impressive and appealing.

The writer should use the official font size when submitting the project.

This size is key when you want to determine the number of pages that your project should carry.

We use font 12 to calculate and know the number of pages the entire work will have to avoid going beyond or under the given guideline.

If you use a different font size, you may exceed or hit below the word count leading to disqualification or any other penalty as the lecturer may decide.

Commonly Used Fonts for Academic Work

Different writing styles recommend certain fonts for students to use while tackling academic work. Some of them are as follows:

Times New Roman

Times New Roman has an authoritative look and feel. It came into practice in 1932 to enhance the legibility and economy of space. This Times New Roman has a narrow printing point that is easily readable.

Arial has been the most used font for the past thirty years. One of the characteristics of Arial fonts is that they have rounded faces. Furthermore, the edges of the letters do not manifest in the horizontal line. Instead, these edges are at an angle.

Besides, this font is easy to read whether used in both large and small blocks. It is a perfect format that one can use in academic work.

Calibri is a humanist font with variable strokes and designs. It is a pretty-looking font suitable for large displays such as presentations.

People Also Read : Research Paper Due Tomorrow: Not started, we Write in hours

Factors Determining the Font and Size for Academic Writing

1. teachers instructions.

When you receive your essay assignment, peruse through it and find the preferred font type and size. Some professors are comfortable with particular fonts.

The professor will indicate the preferred font for your work. You can begin by writing and polishing your work with your font and size and later format it according to instructions.

Most academic papers target certain pages of the assignments.

For example, when the instructions demand that you use Times New Roman, you should stick to that for you to produce the right number of pages as guided by the instructions.

Teachers know that when you use a particular font and size for your research, you will produce the correct quantity after researching.

2. Your Eye Ability

One will feel more comfortable when using certain fonts than others. Reading and writing while you are straining your eyes to see your work can be disastrous. The cool thing is you can settle for the fonts that can make your eye enjoy beholding your work.

Several fonts exist to use for your work without straining your eyes. However, you should ensure that you settle for the right font when formatting your final documents.

For example, some fonts have curls or curves that affect the readability of your work. Such can make your professor respond unkindly.

If the professor did not offer guidance to you, then you can use the correct font according to the writing style recommendations.

3. Teacher’s Font Preference and Eye Abilities

A teacher may instruct that you use certain fonts when submitting your project work. More importantly, even if it is not your favorite font to use, you should stick to the instructions and complete your work as guided.  

We have varying eye abilities. Some are comfortable and safe to use a particular font like Arial because they do not strain the eyes while using it. Some fonts are not friendly to some people when working, making your entire writing experience to be hostile.

If you can work well with 12-point font size, well and good. In case the lecturer wants a point size 10, use a comfortable font during your writing and editing process then change it to the recommended size before submitting.

4. Type of the Academic work, Essays vs Graphics

The type of academic work dictates the type of font to use for effective delivery. If you are writing an essay, you should use the recommended fonts and sizes as per the writing styles. These styles are MLA, APA, and so on.

You should not use any font which is not official to any writing style. If unsure, it is sensible to consult your instructor and remain on the correct track.

On the other hand, you should also use the correct font when you are working with graphics in your academic projects.

Just like essays, the graphics also have official fonts that students should use when designing and captioning them. Sticking to the rules makes your work hold a professional appeal.

Graphics are the perfect way of presenting information to make readers create the right perceptions at a glance. Luckily, you should caption them with the recommended fonts and sizes for better delivery.

5. Personal Preference

What appeals to one writer differs from what makes a different writer excited and comfortable. What does that mean? Different writers have varying impressions about what fonts and sizes work for them.

If the instructions for your projects are open to allow you to use multiple fonts from the given list, you should settle for your favorite from the list.

That implies that the instructor may be marking papers that will come with varying font types according to the writer’s preference from the given list of options.

6. Readability

There is no secret in this. Some fonts are more readable than others.

For example, when you are using Times New Roman as your favorite font, it will consume less space but score high on legibility.

Remember, a readable document is an attractive document. Do not compromise on this. Use the right font that is legible and easy to read.

Based on the recommended fonts for particular styles, choose the one that looks more attractive.

Check out our tips on how to name a research paper for more guidance on how to prepare your paper before submitting it. This may improve the clarity of your file and promote grading.

When not handling complex essays and academic writing tasks, Josh is busy advising students on how to pass assignments. In spare time, he loves playing football or walking with his dog around the park.

Related posts

Is a Person a Primary Source

Is a Person a Primary or Secondary Source of Research?

essay research paper differences

Is an Essay a Research Paper: The Differences from Each

Write Annotated Bibliography

Write Annotated Bibliography for Me: Best Writers to Hire

12 Best Fonts for Academic Papers in Microsoft Word

Good academic papers deserve good academic fonts. You might not have thought too much about which font you use before, but they play a big part in whether people will take your paper seriously or not. This article will explore the best fonts for academic papers.

Best Fonts for Academic Papers in Microsoft Word

The best fonts for academic papers are Times New Roman, Baskerville Old Face, and Georgia. There are plenty of good options, but you’ll mainly want to stick to serif fonts. They look much neater and more professional while showing that the reader can trust what you say.

Times New Roman

Times New Roman is the most famous font on Microsoft Word. It should come as no surprise that it’s a good pick when writing academic papers. It’s got everything you could possibly need when it comes to professionalism and readability.

Times New Roman is the best font to use in most situations. If you’re looking for a more formal font, you’ll find that Times New Roman ranks very highly on the list, regardless of what else is required.

It’s a fairly small font, which looks more appealing for an academic paper. A common pitfall that most people fall for is they try to use a font that’s too large, which can make their paper look less trustworthy and more informal. Neither of those traits is good for academics.

Baskerville Old Face

Baskerville Old Face is a great font to use in an academic paper. There have been studies in the past about different fonts and how they engage readers. It’s believed that Baskerville is one of the most reliable fonts, and the writer tends to be more “truthful” when using it.

Whether you buy into studies like this or not isn’t important. What is important is that Baskerville Old Face is a fantastic choice for most academic papers. It looks really good (like a more concise Times New Roman), and it’s very popular.

Baskerville is a fairly popular choice for published novels, so you might already be familiar with the font style. If you like the way it looks in some of the novels or publications you’ve read, you’ll find that it converts very well to your academic papers.

Georgia ranks very highly when looking for a formal font that will work well in an academic paper. It’s slightly larger than Times New Roman, but a lot of people say that this helps it to become a more “readable” font.

When writing academic papers, it’s wise not to overwhelm your reader with information. The more condensed the font is, the harder it can be to make sense of what you’re writing. With Georgia, this isn’t an issue.

Georgia might be one of the larger fonts listed here, but it makes for an easy read. Plenty of readers will be happy to read through an entire paper written in Georgia, but they might be a bit against reading one in something smaller.

Garamond is another decent option that can work well for academics. Garamond is the smallest font we have included on the list, which can allow you to get a lot of information into a very small space without overwhelming a reader too much.

While it’s not always ideal for including lots of information, Garamond does it really well. It’s readable and professional, allowing your readers to make sense of even the most concise explanations you might include.

It’s also quite a popular choice for many writers. You’ll find that it ranks quite highly simply because of how popular it’s become among a lot of writers on Word.

Cambria is a solid font choice that a lot of people like to use. It’s another default font (though it’s mainly reserved for sub-headings in most Word formats). It runs true to the font size, making it a fairly decent choice if you’re looking for something compact.

The serif style of this font makes it easy to read. It’s nearly indistinguishable from some of the other more popular serif fonts like Times New Roman and Georgia, which is why it is such a popular choice.

However, since it looks so similar, it can make it difficult for people to recognize the font or to figure out which font you’re using. While this isn’t the end of the world, it certainly won’t help you to create a unique feel for your paper either.

Book Antiqua

Book Antiqua is another suitable serif font. It’s not as popular as some of the others, but it looks really good as far as formal fonts go. People like it because it offers a slightly more authentic feel and looks like it could be used in a published novel or academic study.

It’s a standard-sized font, and it’s quite easy to read. A lot of people enjoy using it because it can offer a lot of character to their writing. You might not think that a font has that much power, but you’d be surprised once you try and use Book Antiqua a bit more.

Bookman Old Style

Bookman Old Style is another good font that can look like something out of a published paper. What makes this one special is its size. It’s quite a large font with a decent amount of width to each letter (without going too overboard with the letter spacing).

This font is quite popular for people looking to make their academic papers stand out. It’s not the same style as most of the other serif fonts, allowing your paper to bring a little bit extra that some other people might miss out on.

We encourage you to try this one in multiple different situations. It can work both formally and informally, depending on what you’re looking to get out of it.

Palatino Linotype

Palatino Linotype is a good font for many occasions. You’ll often find it used in academic papers because of the interesting style that comes with it. It looks like a classical font, which takes inspiration from some of the older styles of writing that came before computers.

If you want your academic paper to come across as a bit more traditional or formal, you’ll love this font.

Palatino Linotype offers a great deal of character without changing too much of the original formula that makes fonts like Times New Roman and Georgia so special.

Lucida Bright

Lucida Bright is a great font that is very large compared to most. It works well in academic papers, but you’ve got to make sure you know when to use it. If your paper is particularly word-heavy, it might not be wise to use a font that makes each word much larger.

For example, if you have a page limit on your paper, it might be wise to use a smaller font. Lucida Bright will definitely carry you far over that page limit before you come close to the words you might need to use to explain something.

Nevertheless, it’s still a very attractive font that looks really good in most academic papers. If you’re looking for something that’s stylish and readable, Lucida Bright is a good option.

Calibri is a sans serif font, and it’s the first of its kind on the list. We have only included serif fonts because they tend to be more readable and professional. However, Calibri can work really well if you’re looking for a slightly more approachable feel with your font.

Calibri is like the Times New Roman of the sans serif fonts. It is very popular, and most Microsoft Word versions come with it preloaded as the default font for most written pieces.

That’s what makes it such a valuable choice. You can use it in almost any situation (informal and formal) to a great degree.

Arial is another popular sans serif font that you will be able to use in your academic writing. You don’t always have to use the more formal serif fonts, and Arial is a great example of what can be achieved when you’re a little less formal with your presentation.

Arial is much larger than Calibri when the same font size is used. This makes it a lot more visually appealing, though you have to make sure you don’t overdo it with the number of pages it uses.

Before Calibri replaced it, Arial was also the default sans serif font on Microsoft Word. This has allowed it to be a fairly popular choice for many users, and it remains one of the most popular ones today.

Century Gothic

Century Gothic is the final font we want to cover. It’s a sans serif font that can work really well if you’re looking for a slightly larger font. It’s larger than Arial, making it an easy-to-read font that a lot of people like to utilize.

The only issue you might come across is that the size of it can make it seem much more informal. You should be careful with how you use this font, as it could take away from the professionalism or reliability of your academic paper.

You may also like: 12 Best Fonts for Notes in Microsoft Word 12 Best Victorian Fonts in Microsoft Word 12 Best Chalkboard Fonts for Microsoft Word

Martin holds a Master’s degree in Finance and International Business. He has six years of experience in professional communication with clients, executives, and colleagues. Furthermore, he has teaching experience from Aarhus University. Martin has been featured as an expert in communication and teaching on Forbes and Shopify. Read more about Martin here .

• 12 Best Serif Fonts in Microsoft Word
• 12 Smallest Fonts In Microsoft Word
• 12 Best Victorian Fonts in Microsoft Word
• 5 Best LaTeX Fonts in Microsoft Word

What font should I choose for my thesis?

This post is by DrJanene Carey, a freelance writer and editor based in Armidale NSW. She occasionally teaches academic writing at the University of New England and often edits academic theses, articles and reports. Her website is http://www.janenecarey.com

Arguably, this question is a classic time waster and the student who poses it should be told to just get on with writing up their research. But as someone who edits theses for a living, I think a bit of time spent on fonts is part of the process of buffing and polishing what is, after all, one of the most important documents you will ever produce. Just bear in mind that there is no need to immerse yourself so deeply in the topic that you start quibbling about whether it’s a font or a typeface that you are choosing .

Times New Roman is the standard choice for academic documents, and the thesis preparation guidelines of some universities stipulate its use. For many years, it was the default body text for Microsoft Word. With the release of Office 2007, the default became a sans serif typeface called Calibri. Lacking the little projecting bits (serifs) at the end of characters makes Calibri and its many friends, such as Arial, Helvetica and Verdana, look smoother and clearer on a screen, but generally makes them less readable than a serif typeface when used for printed text . The other problem with choosing a sans serif for your body text is that if you want passages in italics (for example, lengthy participant quotes) often this will be displayed as slanted letters, rather than as a true italic font.

You would like your examiners to feel as comfortable as possible while their eyes are traversing the many, many pages of your thesis, so maximising legibility and readability is a good idea. Times New Roman is ubiquitous and familiar, which means it is probably the safest option, but it does have a couple of drawbacks. Originally designed for The Times in London, its characters are slightly narrowed, so that more of them can be squished into a newspaper column. Secondly, some people intensely dislike TNR because they think it has been overused, and regard it as the font you choose when you are not choosing a font .

If you do have the luxury of choice (your university doesn’t insist you use Times New Roman, and you have defined document styles that are easy to modify, and there’s enough time left before the submission deadline) then I think it is worth considering what other typefaces might work well with your thesis. I’m not a typographical expert, but I have the following suggestions.

• Don’t use Calibri, or any other sans serif font, for your body text, though it is fine for headings. Most people agree that dense chunks of printed text are easier to read if the font is serif, and examiners are likely to expect a typeface that doesn’t stray too far from the standard. To my eye, Calibri looks a little too casual for the body of a thesis.
• Typefaces like Garamond, Palatino, Century Schoolbook, Georgia, Minion Pro, Cambria and Constantia are all perfectly acceptable, and they come with Microsoft Word. However, some of them (Georgia and Constantia, for example) feature non-lining numerals, which means that instead of all sitting neatly on the base line, some will stand higher or lower than others, just like letters do. This looks nice when they are integrated with the text, but it is probably not what you want for a tabular display.
• Consider using a different typeface for your headings. It will make them more prominent, which enhances overall readability because the eye scanning the pages can quickly take in the hierarchy of ideas. The easiest way to get a good contrast with your serif body text is to have sans serif headings. Popular combinations are Garamond/Helvetica; Minion Pro/Myriad Pro; Times New Roman/Arial Narrow. But don’t create a dog’s breakfast by having more than two typefaces in your thesis – use point sizes, bold and italics for variety.

Of late, I’ve become quite fond of Constantia. It’s an attractive serif typeface that came out with Office 2007 at the same time as Calibri, and was specifically designed to look good in print and on screen. Increasingly, theses will be read in PDF rather than book format, so screen readability is an important consideration.  Asked to review Microsoft’s six new ClearType fonts prior to their release, typographer Raph Levien said Constantia was likely to be everyone’s favourite, because ‘Even though it’s a highly readable Roman font departing only slightly from the classical model, it still manages to be fresh and new.’

By default, Constantia has non-lining numerals, but from Word 2010 onwards you can set them to be lining via the advanced font/number forms option, either throughout your document or in specific sections, such as within tables.

Here is an excerpt from a thesis, shown twice with different typefaces. The first excerpt features Calibri headings with Constantia body text, and the second has that old favourite, Times New Roman. As these examples have been rendered as screenshots, you will get a better idea of how the fonts actually look if you try them on your own computer and printer.

Related posts

Should I get an editor for my thesis?

Love the Thesis whisperer and want it to continue? Consider becoming a $1 a month Patreon and get special, Patreon only, extra Thesiswhisperer content every two weeks!

Share this:

The Thesis Whisperer is written by Professor Inger Mewburn, director of researcher development at The Australian National University . New posts on the first Wednesday of the month. Subscribe by email below. Visit the About page to find out more about me, my podcasts and books. I'm on most social media platforms as @thesiswhisperer. The best places to talk to me are LinkedIn , Mastodon and Threads.

• Post (609)
• Page (16)
• Product (6)
• Getting things done (259)
• Miscellany (139)
• On Writing (139)
• Your Career (113)
• You and your supervisor (66)
• Writing (48)
• productivity (23)
• consulting (13)
• TWC (13)
• supervision (12)
• 2024 (8)
• 2023 (12)
• 2022 (11)
• 2021 (15)
• 2020 (22)

Whisper to me....

Enter your email address to get posts by email.

Email Address

Sign me up!

• On the reg: a podcast with @jasondowns
• Thesis Whisperer on Facebook
• Thesis Whisperer on Instagram
• Thesis Whisperer on Soundcloud
• Thesis Whisperer on Youtube
• Thesiswhisperer on Mastodon
• Thesiswhisperer page on LinkedIn
• Thesiswhisperer Podcast
• 12,246,463 hits

Discover more from The Thesis Whisperer

Subscribe now to keep reading and get access to the full archive.

Type your email…

Continue reading

A variety of fonts are permitted in APA Style papers. Font options include the following:

• sans serif fonts such as 11-point Calibri, 11-point Arial, or 10-point Lucida Sans Unicode
• serif fonts such as 12-point Times New Roman, 11-point Georgia, or normal (10-point) Computer Modern (the default font for LaTeX)

We recommend these fonts because they are legible and widely available and because they include special characters such as math symbols and Greek letters. Historically, sans serif fonts have been preferred for online works and serif fonts for print works; however, modern screen resolutions can typically accommodate either type of font, and people who use assistive technologies can adjust font settings to their preferences. For more on how font relates to accessibility, visit the page on the accessibility of APA Style .

Use the same font throughout your paper, with the following exceptions:

• figures: Within figure images, use a sans serif font with a type size between 8 and 14 points.
• computer code: To present computer code, use a monospace font such as 10-point Lucida Console or 10-point Courier New.
• footnotes: When inserting footnotes with the footnotes function of your word-processing program, use the default font settings. The footnote font might be smaller than the text font (and have different line spacing), and it is not necessary to change it.

Instructors and publishers vary in how they specify length requirements. Different fonts take up different amounts of space on the page; thus, we recommend using word count rather than page count to gauge paper length if possible.

Font is covered in the seventh edition APA Style manuals in the Publication Manual Section 2.19 and the Concise Guide Section 1.18

Related handout

• Student Paper Setup Guide (PDF, 3MB)

From the APA Style blog

APA Style student papers webinar

A new APA Style webinar, “A Step-by-Step Guide for APA Style Student Papers,” taking place on September 10, 2020, will provide detailed guidance on creating, formatting, and organizing APA Style student papers.

• Privacy Policy

Home » Research Paper Format – Types, Examples and Templates

Research Paper Format – Types, Examples and Templates

Table of Contents

Research paper format is an essential aspect of academic writing that plays a crucial role in the communication of research findings . The format of a research paper depends on various factors such as the discipline, style guide, and purpose of the research. It includes guidelines for the structure, citation style, referencing , and other elements of the paper that contribute to its overall presentation and coherence. Adhering to the appropriate research paper format is vital for ensuring that the research is accurately and effectively communicated to the intended audience. In this era of information, it is essential to understand the different research paper formats and their guidelines to communicate research effectively, accurately, and with the required level of detail. This post aims to provide an overview of some of the common research paper formats used in academic writing.

Research Paper Formats

Research Paper Formats are as follows:

• APA (American Psychological Association) format
• MLA (Modern Language Association) format
• Chicago/Turabian style
• IEEE (Institute of Electrical and Electronics Engineers) format
• AMA (American Medical Association) style
• Harvard style
• Vancouver style
• ACS (American Chemical Society) style
• ASA (American Sociological Association) style
• APSA (American Political Science Association) style

APA (American Psychological Association) Format

Here is a general APA format for a research paper:

• Title Page: The title page should include the title of your paper, your name, and your institutional affiliation. It should also include a running head, which is a shortened version of the title, and a page number in the upper right-hand corner.
• Abstract : The abstract is a brief summary of your paper, typically 150-250 words. It should include the purpose of your research, the main findings, and any implications or conclusions that can be drawn.
• Introduction: The introduction should provide background information on your topic, state the purpose of your research, and present your research question or hypothesis. It should also include a brief literature review that discusses previous research on your topic.
• Methods: The methods section should describe the procedures you used to collect and analyze your data. It should include information on the participants, the materials and instruments used, and the statistical analyses performed.
• Results: The results section should present the findings of your research in a clear and concise manner. Use tables and figures to help illustrate your results.
• Discussion : The discussion section should interpret your results and relate them back to your research question or hypothesis. It should also discuss the implications of your findings and any limitations of your study.
• References : The references section should include a list of all sources cited in your paper. Follow APA formatting guidelines for your citations and references.

Some additional tips for formatting your APA research paper:

• Use 12-point Times New Roman font throughout the paper.
• Double-space all text, including the references.
• Use 1-inch margins on all sides of the page.
• Indent the first line of each paragraph by 0.5 inches.
• Use a hanging indent for the references (the first line should be flush with the left margin, and all subsequent lines should be indented).
• Number all pages, including the title page and references page, in the upper right-hand corner.

APA Research Paper Format Template

APA Research Paper Format Template is as follows:

Title Page:

• Title of the paper
• Author’s name
• Institutional affiliation
• A brief summary of the main points of the paper, including the research question, methods, findings, and conclusions. The abstract should be no more than 250 words.

Introduction:

• Background information on the topic of the research paper
• Research question or hypothesis
• Significance of the study
• Overview of the research methods and design
• Brief summary of the main findings
• Participants: description of the sample population, including the number of participants and their characteristics (age, gender, ethnicity, etc.)
• Materials: description of any materials used in the study (e.g., survey questions, experimental apparatus)
• Procedure: detailed description of the steps taken to conduct the study
• Presentation of the findings of the study, including statistical analyses if applicable
• Tables and figures may be included to illustrate the results

Discussion:

• Interpretation of the results in light of the research question and hypothesis
• Implications of the study for the field
• Limitations of the study
• Suggestions for future research

References:

• A list of all sources cited in the paper, in APA format

Formatting guidelines:

• Double-spaced
• 12-point font (Times New Roman or Arial)
• 1-inch margins on all sides
• Page numbers in the top right corner
• Headings and subheadings should be used to organize the paper
• The first line of each paragraph should be indented
• Quotations of 40 or more words should be set off in a block quote with no quotation marks
• In-text citations should include the author’s last name and year of publication (e.g., Smith, 2019)

APA Research Paper Format Example

APA Research Paper Format Example is as follows:

The Effects of Social Media on Mental Health

University of XYZ

This study examines the relationship between social media use and mental health among college students. Data was collected through a survey of 500 students at the University of XYZ. Results suggest that social media use is significantly related to symptoms of depression and anxiety, and that the negative effects of social media are greater among frequent users.

Social media has become an increasingly important aspect of modern life, especially among young adults. While social media can have many positive effects, such as connecting people across distances and sharing information, there is growing concern about its impact on mental health. This study aims to examine the relationship between social media use and mental health among college students.

Participants: Participants were 500 college students at the University of XYZ, recruited through online advertisements and flyers posted on campus. Participants ranged in age from 18 to 25, with a mean age of 20.5 years. The sample was 60% female, 40% male, and 5% identified as non-binary or gender non-conforming.

Data was collected through an online survey administered through Qualtrics. The survey consisted of several measures, including the Patient Health Questionnaire-9 (PHQ-9) for depression symptoms, the Generalized Anxiety Disorder-7 (GAD-7) for anxiety symptoms, and questions about social media use.

Procedure :

Participants were asked to complete the online survey at their convenience. The survey took approximately 20-30 minutes to complete. Data was analyzed using descriptive statistics, correlations, and multiple regression analysis.

Results indicated that social media use was significantly related to symptoms of depression (r = .32, p < .001) and anxiety (r = .29, p < .001). Regression analysis indicated that frequency of social media use was a significant predictor of both depression symptoms (β = .24, p < .001) and anxiety symptoms (β = .20, p < .001), even when controlling for age, gender, and other relevant factors.

The results of this study suggest that social media use is associated with symptoms of depression and anxiety among college students. The negative effects of social media are greater among frequent users. These findings have important implications for mental health professionals and educators, who should consider addressing the potential negative effects of social media use in their work with young adults.

References :

References should be listed in alphabetical order according to the author’s last name. For example:

• Chou, H. T. G., & Edge, N. (2012). “They are happier and having better lives than I am”: The impact of using Facebook on perceptions of others’ lives. Cyberpsychology, Behavior, and Social Networking, 15(2), 117-121.
• Twenge, J. M., Joiner, T. E., Rogers, M. L., & Martin, G. N. (2018). Increases in depressive symptoms, suicide-related outcomes, and suicide rates among U.S. adolescents after 2010 and links to increased new media screen time. Clinical Psychological Science, 6(1), 3-17.

Note: This is just a sample Example do not use this in your assignment.

MLA (Modern Language Association) Format

MLA (Modern Language Association) Format is as follows:

• Page Layout : Use 8.5 x 11-inch white paper, with 1-inch margins on all sides. The font should be 12-point Times New Roman or a similar serif font.
• Heading and Title : The first page of your research paper should include a heading and a title. The heading should include your name, your instructor’s name, the course title, and the date. The title should be centered and in title case (capitalizing the first letter of each important word).
• In-Text Citations : Use parenthetical citations to indicate the source of your information. The citation should include the author’s last name and the page number(s) of the source. For example: (Smith 23).
• Works Cited Page : At the end of your paper, include a Works Cited page that lists all the sources you used in your research. Each entry should include the author’s name, the title of the work, the publication information, and the medium of publication.
• Formatting Quotations : Use double quotation marks for short quotations and block quotations for longer quotations. Indent the entire quotation five spaces from the left margin.
• Formatting the Body : Use a clear and readable font and double-space your text throughout. The first line of each paragraph should be indented one-half inch from the left margin.

MLA Research Paper Template

MLA Research Paper Format Template is as follows:

• Use 8.5 x 11 inch white paper.
• Use a 12-point font, such as Times New Roman.
• Use double-spacing throughout the entire paper, including the title page and works cited page.
• Set the margins to 1 inch on all sides.
• Use page numbers in the upper right corner, beginning with the first page of text.
• Include a centered title for the research paper, using title case (capitalizing the first letter of each important word).
• Include your name, instructor’s name, course name, and date in the upper left corner, double-spaced.

In-Text Citations

• When quoting or paraphrasing information from sources, include an in-text citation within the text of your paper.
• Use the author’s last name and the page number in parentheses at the end of the sentence, before the punctuation mark.
• If the author’s name is mentioned in the sentence, only include the page number in parentheses.

Works Cited Page

• List all sources cited in alphabetical order by the author’s last name.
• Each entry should include the author’s name, title of the work, publication information, and medium of publication.
• Use italics for book and journal titles, and quotation marks for article and chapter titles.
• For online sources, include the date of access and the URL.

Here is an example of how the first page of a research paper in MLA format should look:

Headings and Subheadings

• Use headings and subheadings to organize your paper and make it easier to read.
• Use numerals to number your headings and subheadings (e.g. 1, 2, 3), and capitalize the first letter of each word.
• The main heading should be centered and in boldface type, while subheadings should be left-aligned and in italics.
• Use only one space after each period or punctuation mark.
• Use quotation marks to indicate direct quotes from a source.
• If the quote is more than four lines, format it as a block quote, indented one inch from the left margin and without quotation marks.
• Use ellipses (…) to indicate omitted words from a quote, and brackets ([…]) to indicate added words.

Works Cited Examples

• Book: Last Name, First Name. Title of Book. Publisher, Publication Year.
• Journal Article: Last Name, First Name. “Title of Article.” Title of Journal, volume number, issue number, publication date, page numbers.
• Website: Last Name, First Name. “Title of Webpage.” Title of Website, publication date, URL. Accessed date.

Here is an example of how a works cited entry for a book should look:

Smith, John. The Art of Writing Research Papers. Penguin, 2021.

MLA Research Paper Example

MLA Research Paper Format Example is as follows:

Your Professor’s Name

Course Name and Number

Date (in Day Month Year format)

Word Count (not including title page or Works Cited)

Title: The Impact of Video Games on Aggression Levels

Video games have become a popular form of entertainment among people of all ages. However, the impact of video games on aggression levels has been a subject of debate among scholars and researchers. While some argue that video games promote aggression and violent behavior, others argue that there is no clear link between video games and aggression levels. This research paper aims to explore the impact of video games on aggression levels among young adults.

Background:

The debate on the impact of video games on aggression levels has been ongoing for several years. According to the American Psychological Association, exposure to violent media, including video games, can increase aggression levels in children and adolescents. However, some researchers argue that there is no clear evidence to support this claim. Several studies have been conducted to examine the impact of video games on aggression levels, but the results have been mixed.

Methodology:

This research paper used a quantitative research approach to examine the impact of video games on aggression levels among young adults. A sample of 100 young adults between the ages of 18 and 25 was selected for the study. The participants were asked to complete a questionnaire that measured their aggression levels and their video game habits.

The results of the study showed that there was a significant correlation between video game habits and aggression levels among young adults. The participants who reported playing violent video games for more than 5 hours per week had higher aggression levels than those who played less than 5 hours per week. The study also found that male participants were more likely to play violent video games and had higher aggression levels than female participants.

The findings of this study support the claim that video games can increase aggression levels among young adults. However, it is important to note that the study only examined the impact of video games on aggression levels and did not take into account other factors that may contribute to aggressive behavior. It is also important to note that not all video games promote violence and aggression, and some games may have a positive impact on cognitive and social skills.

Conclusion :

In conclusion, this research paper provides evidence to support the claim that video games can increase aggression levels among young adults. However, it is important to conduct further research to examine the impact of video games on other aspects of behavior and to explore the potential benefits of video games. Parents and educators should be aware of the potential impact of video games on aggression levels and should encourage young adults to engage in a variety of activities that promote cognitive and social skills.

Works Cited:

• American Psychological Association. (2017). Violent Video Games: Myths, Facts, and Unanswered Questions. Retrieved from https://www.apa.org/news/press/releases/2017/08/violent-video-games
• Ferguson, C. J. (2015). Do Angry Birds make for angry children? A meta-analysis of video game influences on children’s and adolescents’ aggression, mental health, prosocial behavior, and academic performance. Perspectives on Psychological Science, 10(5), 646-666.
• Gentile, D. A., Swing, E. L., Lim, C. G., & Khoo, A. (2012). Video game playing, attention problems, and impulsiveness: Evidence of bidirectional causality. Psychology of Popular Media Culture, 1(1), 62-70.
• Greitemeyer, T. (2014). Effects of prosocial video games on prosocial behavior. Journal of Personality and Social Psychology, 106(4), 530-548.

Chicago/Turabian Style

Chicago/Turabian Formate is as follows:

• Margins : Use 1-inch margins on all sides of the paper.
• Font : Use a readable font such as Times New Roman or Arial, and use a 12-point font size.
• Page numbering : Number all pages in the upper right-hand corner, beginning with the first page of text. Use Arabic numerals.
• Title page: Include a title page with the title of the paper, your name, course title and number, instructor’s name, and the date. The title should be centered on the page and in title case (capitalize the first letter of each word).
• Headings: Use headings to organize your paper. The first level of headings should be centered and in boldface or italics. The second level of headings should be left-aligned and in boldface or italics. Use as many levels of headings as necessary to organize your paper.
• In-text citations : Use footnotes or endnotes to cite sources within the text of your paper. The first citation for each source should be a full citation, and subsequent citations can be shortened. Use superscript numbers to indicate footnotes or endnotes.
• Bibliography : Include a bibliography at the end of your paper, listing all sources cited in your paper. The bibliography should be in alphabetical order by the author’s last name, and each entry should include the author’s name, title of the work, publication information, and date of publication.
• Formatting of quotations: Use block quotations for quotations that are longer than four lines. Indent the entire quotation one inch from the left margin, and do not use quotation marks. Single-space the quotation, and double-space between paragraphs.
• Tables and figures: Use tables and figures to present data and illustrations. Number each table and figure sequentially, and provide a brief title for each. Place tables and figures as close as possible to the text that refers to them.
• Spelling and grammar : Use correct spelling and grammar throughout your paper. Proofread carefully for errors.

Chicago/Turabian Research Paper Template

Chicago/Turabian Research Paper Template is as folows:

Title of Paper

Name of Student

Professor’s Name

I. Introduction

A. Background Information

B. Research Question

C. Thesis Statement

II. Literature Review

A. Overview of Existing Literature

B. Analysis of Key Literature

C. Identification of Gaps in Literature

III. Methodology

A. Research Design

B. Data Collection

C. Data Analysis

IV. Results

A. Presentation of Findings

B. Analysis of Findings

C. Discussion of Implications

V. Conclusion

A. Summary of Findings

B. Implications for Future Research

C. Conclusion

VI. References

A. Bibliography

B. In-Text Citations

VII. Appendices (if necessary)

A. Data Tables

C. Additional Supporting Materials

Chicago/Turabian Research Paper Example

Title: The Impact of Social Media on Political Engagement

Name: John Smith

Class: POLS 101

Professor: Dr. Jane Doe

Date: April 8, 2023

I. Introduction:

Social media has become an integral part of our daily lives. People use social media platforms like Facebook, Twitter, and Instagram to connect with friends and family, share their opinions, and stay informed about current events. With the rise of social media, there has been a growing interest in understanding its impact on various aspects of society, including political engagement. In this paper, I will examine the relationship between social media use and political engagement, specifically focusing on how social media influences political participation and political attitudes.

II. Literature Review:

There is a growing body of literature on the impact of social media on political engagement. Some scholars argue that social media has a positive effect on political participation by providing new channels for political communication and mobilization (Delli Carpini & Keeter, 1996; Putnam, 2000). Others, however, suggest that social media can have a negative impact on political engagement by creating filter bubbles that reinforce existing beliefs and discourage political dialogue (Pariser, 2011; Sunstein, 2001).

III. Methodology:

To examine the relationship between social media use and political engagement, I conducted a survey of 500 college students. The survey included questions about social media use, political participation, and political attitudes. The data was analyzed using descriptive statistics and regression analysis.

Iv. Results:

The results of the survey indicate that social media use is positively associated with political participation. Specifically, respondents who reported using social media to discuss politics were more likely to have participated in a political campaign, attended a political rally, or contacted a political representative. Additionally, social media use was found to be associated with more positive attitudes towards political engagement, such as increased trust in government and belief in the effectiveness of political action.

V. Conclusion:

The findings of this study suggest that social media has a positive impact on political engagement, by providing new opportunities for political communication and mobilization. However, there is also a need for caution, as social media can also create filter bubbles that reinforce existing beliefs and discourage political dialogue. Future research should continue to explore the complex relationship between social media and political engagement, and develop strategies to harness the potential benefits of social media while mitigating its potential negative effects.

Vii. References:

• Delli Carpini, M. X., & Keeter, S. (1996). What Americans know about politics and why it matters. Yale University Press.
• Pariser, E. (2011). The filter bubble: What the Internet is hiding from you. Penguin.
• Putnam, R. D. (2000). Bowling alone: The collapse and revival of American community. Simon & Schuster.
• Sunstein, C. R. (2001). Republic.com. Princeton University Press.

IEEE (Institute of Electrical and Electronics Engineers) Format

IEEE (Institute of Electrical and Electronics Engineers) Research Paper Format is as follows:

• Title : A concise and informative title that accurately reflects the content of the paper.
• Abstract : A brief summary of the paper, typically no more than 250 words, that includes the purpose of the study, the methods used, the key findings, and the main conclusions.
• Introduction : An overview of the background, context, and motivation for the research, including a clear statement of the problem being addressed and the objectives of the study.
• Literature review: A critical analysis of the relevant research and scholarship on the topic, including a discussion of any gaps or limitations in the existing literature.
• Methodology : A detailed description of the methods used to collect and analyze data, including any experiments or simulations, data collection instruments or procedures, and statistical analyses.
• Results : A clear and concise presentation of the findings, including any relevant tables, graphs, or figures.
• Discussion : A detailed interpretation of the results, including a comparison of the findings with previous research, a discussion of the implications of the results, and any recommendations for future research.
• Conclusion : A summary of the key findings and main conclusions of the study.
• References : A list of all sources cited in the paper, formatted according to IEEE guidelines.

In addition to these elements, an IEEE research paper should also follow certain formatting guidelines, including using 12-point font, double-spaced text, and numbered headings and subheadings. Additionally, any tables, figures, or equations should be clearly labeled and referenced in the text.

AMA (American Medical Association) Style

AMA (American Medical Association) Style Research Paper Format:

• Title Page: This page includes the title of the paper, the author’s name, institutional affiliation, and any acknowledgments or disclaimers.
• Abstract: The abstract is a brief summary of the paper that outlines the purpose, methods, results, and conclusions of the study. It is typically limited to 250 words or less.
• Introduction: The introduction provides a background of the research problem, defines the research question, and outlines the objectives and hypotheses of the study.
• Methods: The methods section describes the research design, participants, procedures, and instruments used to collect and analyze data.
• Results: The results section presents the findings of the study in a clear and concise manner, using graphs, tables, and charts where appropriate.
• Discussion: The discussion section interprets the results, explains their significance, and relates them to previous research in the field.
• Conclusion: The conclusion summarizes the main points of the paper, discusses the implications of the findings, and suggests future research directions.
• References: The reference list includes all sources cited in the paper, listed in alphabetical order by author’s last name.

In addition to these sections, the AMA format requires that authors follow specific guidelines for citing sources in the text and formatting their references. The AMA style uses a superscript number system for in-text citations and provides specific formats for different types of sources, such as books, journal articles, and websites.

Harvard Style

Harvard Style Research Paper format is as follows:

• Title page: This should include the title of your paper, your name, the name of your institution, and the date of submission.
• Abstract : This is a brief summary of your paper, usually no more than 250 words. It should outline the main points of your research and highlight your findings.
• Introduction : This section should introduce your research topic, provide background information, and outline your research question or thesis statement.
• Literature review: This section should review the relevant literature on your topic, including previous research studies, academic articles, and other sources.
• Methodology : This section should describe the methods you used to conduct your research, including any data collection methods, research instruments, and sampling techniques.
• Results : This section should present your findings in a clear and concise manner, using tables, graphs, and other visual aids if necessary.
• Discussion : This section should interpret your findings and relate them to the broader research question or thesis statement. You should also discuss the implications of your research and suggest areas for future study.
• Conclusion : This section should summarize your main findings and provide a final statement on the significance of your research.
• References : This is a list of all the sources you cited in your paper, presented in alphabetical order by author name. Each citation should include the author’s name, the title of the source, the publication date, and other relevant information.

In addition to these sections, a Harvard Style research paper may also include a table of contents, appendices, and other supplementary materials as needed. It is important to follow the specific formatting guidelines provided by your instructor or academic institution when preparing your research paper in Harvard Style.

Vancouver Style

Vancouver Style Research Paper format is as follows:

The Vancouver citation style is commonly used in the biomedical sciences and is known for its use of numbered references. Here is a basic format for a research paper using the Vancouver citation style:

• Title page: Include the title of your paper, your name, the name of your institution, and the date.
• Abstract : This is a brief summary of your research paper, usually no more than 250 words.
• Introduction : Provide some background information on your topic and state the purpose of your research.
• Methods : Describe the methods you used to conduct your research, including the study design, data collection, and statistical analysis.
• Results : Present your findings in a clear and concise manner, using tables and figures as needed.
• Discussion : Interpret your results and explain their significance. Also, discuss any limitations of your study and suggest directions for future research.
• References : List all of the sources you cited in your paper in numerical order. Each reference should include the author’s name, the title of the article or book, the name of the journal or publisher, the year of publication, and the page numbers.

ACS (American Chemical Society) Style

ACS (American Chemical Society) Style Research Paper format is as follows:

The American Chemical Society (ACS) Style is a citation style commonly used in chemistry and related fields. When formatting a research paper in ACS Style, here are some guidelines to follow:

• Paper Size and Margins : Use standard 8.5″ x 11″ paper with 1-inch margins on all sides.
• Font: Use a 12-point serif font (such as Times New Roman) for the main text. The title should be in bold and a larger font size.
• Title Page : The title page should include the title of the paper, the authors’ names and affiliations, and the date of submission. The title should be centered on the page and written in bold font. The authors’ names should be centered below the title, followed by their affiliations and the date.
• Abstract : The abstract should be a brief summary of the paper, no more than 250 words. It should be on a separate page and include the title of the paper, the authors’ names and affiliations, and the text of the abstract.
• Main Text : The main text should be organized into sections with headings that clearly indicate the content of each section. The introduction should provide background information and state the research question or hypothesis. The methods section should describe the procedures used in the study. The results section should present the findings of the study, and the discussion section should interpret the results and provide conclusions.
• References: Use the ACS Style guide to format the references cited in the paper. In-text citations should be numbered sequentially throughout the text and listed in numerical order at the end of the paper.
• Figures and Tables: Figures and tables should be numbered sequentially and referenced in the text. Each should have a descriptive caption that explains its content. Figures should be submitted in a high-quality electronic format.
• Supporting Information: Additional information such as data, graphs, and videos may be included as supporting information. This should be included in a separate file and referenced in the main text.
• Acknowledgments : Acknowledge any funding sources or individuals who contributed to the research.

ASA (American Sociological Association) Style

ASA (American Sociological Association) Style Research Paper format is as follows:

• Title Page: The title page of an ASA style research paper should include the title of the paper, the author’s name, and the institutional affiliation. The title should be centered and should be in title case (the first letter of each major word should be capitalized).
• Abstract: An abstract is a brief summary of the paper that should appear on a separate page immediately following the title page. The abstract should be no more than 200 words in length and should summarize the main points of the paper.
• Main Body: The main body of the paper should begin on a new page following the abstract page. The paper should be double-spaced, with 1-inch margins on all sides, and should be written in 12-point Times New Roman font. The main body of the paper should include an introduction, a literature review, a methodology section, results, and a discussion.
• References : The reference section should appear on a separate page at the end of the paper. All sources cited in the paper should be listed in alphabetical order by the author’s last name. Each reference should include the author’s name, the title of the work, the publication information, and the date of publication.
• Appendices : Appendices are optional and should only be included if they contain information that is relevant to the study but too lengthy to be included in the main body of the paper. If you include appendices, each one should be labeled with a letter (e.g., Appendix A, Appendix B, etc.) and should be referenced in the main body of the paper.

APSA (American Political Science Association) Style

APSA (American Political Science Association) Style Research Paper format is as follows:

• Title Page: The title page should include the title of the paper, the author’s name, the name of the course or instructor, and the date.
• Abstract : An abstract is typically not required in APSA style papers, but if one is included, it should be brief and summarize the main points of the paper.
• Introduction : The introduction should provide an overview of the research topic, the research question, and the main argument or thesis of the paper.
• Literature Review : The literature review should summarize the existing research on the topic and provide a context for the research question.
• Methods : The methods section should describe the research methods used in the paper, including data collection and analysis.
• Results : The results section should present the findings of the research.
• Discussion : The discussion section should interpret the results and connect them back to the research question and argument.
• Conclusion : The conclusion should summarize the main findings and implications of the research.
• References : The reference list should include all sources cited in the paper, formatted according to APSA style guidelines.

In-text citations in APSA style use parenthetical citation, which includes the author’s last name, publication year, and page number(s) if applicable. For example, (Smith 2010, 25).

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Research Methodology – Types, Examples and...

Context of the Study – Writing Guide and Examples

Research Design – Types, Methods and Examples

Research Paper Title – Writing Guide and Example

Research Paper Conclusion – Writing Guide and...

Significance of the Study – Examples and Writing...

Dr. Mark Womack

What Font Should I Use?

The Modern Language Association (MLA) provides explicit, specific recommendations for the margins and spacing of academic papers. (See: Document Format .) But their advice on font selection is less precise: “Always choose an easily readable typeface (e.g. Times New Roman) in which the regular style contrasts clearly with the italic, and set it to a standard size (e.g. 12 point)” ( MLA Handbook , 7th ed., §4.2).

So which fonts are “easily readable” and have “clearly” contrasting italics? And what exactly is a “standard” size?

For academic papers, an “easily readable typeface” means a serif font, and a “standard” type size is between 10 and 12 point.

Use A Serif Font

Serifs are the tiny strokes at the end of a letter’s main strokes. Serif fonts have these extra strokes; sans serif fonts do not. ( Sans is French for “without.”) Serif fonts also vary the thickness of the letter strokes more than sans serifs, which have more uniform lines.

Books, newspapers, and magazines typically set their main text in a serif font because they make paragraphs and long stretches of text easier to read. Sans serifs (Arial, Calibri, Helvetica, Gill Sans, Verdana, and so on) work well for single lines of text, like headings or titles, but they rarely make a good choice for body text.

Moreover, most sans serifs don’t have a true italic style. Their “italics” are really just “obliques,” where the letters slant slightly to the right but keep the same shape and spacing. Most serifs, on the other hand, do have a true italic style, with distinctive letter forms and more compact spacing.

Since they’re more readable for long passages and have sharper contrast in their italics, you should always use a serif font for the text of an academic paper.

Use A Readable Type Size

The standard unit for measuring type size is the point . A point is 1 / 72 of an inch, roughly one pixel on a computer screen. The point size of a font tells you the size of the “em square” in which your computer displays each letter of the typeface. How tall or wide any given letter is depends on how the type designer drew it within the em square, thus a font’s height and width can vary greatly depending on the design of the typeface. That’s why if you set two fonts at the same point size, one usually looks bigger than the other.

Compare the following paragraphs, both set at 12 point but in different fonts:

For body text in academic papers, type sizes below 10 point are usually too small to read easily, while type sizes above 12 point tend to look oversized and bulky. So keep the text of your paper between 10 and 12 point .

Some teachers may require you to set your whole text at 12 point. Yet virtually every book, magazine, or newspaper ever printed for visually unimpaired grown-ups sets its body type smaller than 12 point. Newspapers use even smaller type sizes. The New York Times , for example, sets its body text in a perfectly legible 8.7 point font. So with proper spacing and margins, type sizes of 11 or 10 point can be quite comfortable to read.

Font Recommendations

I usually ask my students to use Century Schoolbook or Palatino for their papers. If your teacher requires you to submit your papers in a particular font, do so. (Unless they require you to use Arial , in which case drop the class.)

One thing to consider when choosing a font is how you submit your essay. When you submit a hard copy or a PDF, your reader will see the text in whatever typeface you use. Most electronic submission formats, on the other hand, can only use the fonts available on the reader’s computer. So if you submit the paper electronically, be sure to use a font your instructor has.

What follows is a list of some widely available, highly legible serif fonts well-suited for academic papers. I’ve divided them into four categories: Microsoft Word Fonts, Mac OS Fonts, Google Fonts, and Universal Fonts.

Microsoft Word Fonts

Microsoft Word comes with lots of fonts of varying quality. If your teacher asks you to submit your paper in Word format, you can safely assume they have Word and all the fonts that go with it.

Morris Fuller Benton designed Century Schoolbook in 1923 for elementary-school textbooks, so it’s a highly readable font. It’s one of the best fonts available with Microsoft Word. Because it’s so legible, U. S. Supreme Court Rule 33.1.b madates that all legal documents submitted to the Court be set in Century Schoolbook or a similar Century-style font.

Hermann Zapf designed Palatino in 1948 for titles and headings, but its elegant proportions make it a good font for body text. Named for Renaissance calligrapher Giambattista Palatino, this font has the beauty, harmony, and grace of fine handwriting. Palatino Linotype is the name of the font included with Microsoft Word; Mac OS includes a version of the same typeface called simply Palatino.

Microsoft Word includes several other fonts that can work well for academic essays: Bell MT , Californian FB , Calisto MT , Cambria , Garamond , and Goudy Old Style .

Mac OS Fonts

Apple has a well-deserved reputation for design excellence which extends to its font library. But you can’t count on any of these Mac OS fonts being on a computer that runs Windows.

Finding his inspiration in the typography of Pierre Simon Fournier, Matthew Carter designed Charter in 1987 to look good even on crappy mid-80s fax machines and printers. Its ability to hold up even in low resolution makes Charter work superbly well on screen. Bitstream released Charter under an open license, so you can add it to your font arsenal for free. You can download Charter here .

In 1991 Apple commissioned Jonathan Hoefler to design a font that could show off the Mac’s ability to handle complex typography. The result was Hoefler Text , included with every Mac since then. The bold weight of Hoefler Text on the Mac is excessively heavy, but otherwise it’s a remarkable font: compact without being cramped, formal without being stuffy, and distinctive without being obtrusive. If you have a Mac, start using it.

Other Mac OS fonts you might consider are Baskerville and Palatino .

Google Fonts

When you submit a paper using Google Docs, you can access Google’s vast library of free fonts knowing that anyone who opens it in Google Docs will have those same fonts. Unfortunately, most of those free fonts are worth exactly what you paid for them, so choose wisely.

IBM Plex is a super-family of typefaces designed by Mike Abbink and the Bold Monday type foundry for — you guessed it — IBM. Plex serif is a solid, legible font that borrows features from Janson and Bodoni in its design. Plex is, not surprisingly, a thoroughly corporate font that aims for and achieves a bland neutrality suitable for most research papers.

John Baskerville originally designed this typeface in the 1850s, employing new techniques to make sharper contrasts between thin and thick strokes in the letter forms. The crisp, elegant design has inspired dozens of subsequent versions. Libre Baskerville is based on the American Type Founder’s 1941 version, modified to make it better for on-screen reading.

Unfortunately. Google Fonts has few really good serif fonts. Some others you might consider are Crimson Pro and Spectral .

Universal Fonts

Anyone you send your document to will have these fonts because they’re built in to both Windows and Mac OS.

Matthew Carter designed Georgia in 1993 for maximum legibility on computer screens. Georgia looks very nice on web sites, but in print it can look a bit clunky, especially when set at 12 point. Like Times New Roman, it’s on every computer and is quite easy to read. The name “Georgia” comes from a tabloid headline: “Alien Heads Found in Georgia.”

Times New Roman is, for better or worse, the standard font for academic manuscripts. Many teachers require it because it’s a solid, legible, and universally available font. Stanley Morison designed it in 1931 for The Times newspaper of London, so it’s a very efficient font and legible even at very small sizes. Times New Roman is always a safe choice. But unless your instructor requires it, you should probably use something a bit less overworked.

• View on Facebook Page (Opens in a new tab)
• View our Twitter Page (Opens in a new tab)
• View our Instagram Page (Opens in a new tab)
• View our Youtube Page (Opens in a new tab)

Use These Fonts to Help Remember What You Study

While I generally recommend taking notes by hand , there are some benefits to modernizing your practice and taking them on the computer, too. One way digital notes can really help you remember what you’re studying is by paying attention to the fonts you use.

I learned this tip last year, and I spent my second semester taking Research Methods notes in uncommon fonts that were still easy enough to read—and it really did seem to help me remember more, so I looked into how deep the research on fonts-for-memory goes. Turns out, there are a few different ways fonts can be useful.

Use Times New Roman for reading comprehension

Between my own 18 years of schooling and my decade-long side hustle as a writing tutor, I often joked I think in Times New Roman, size 12. According to science, that’s actually a good thing in some cases: One researcher at the University of Nebraska Omaha found in 2019 that easy-to-read fonts like Times New Roman helped study participants get a higher proportion of answers correct on reading comprehension questions. Their research found that in extended texts, Times New Roman is overall better for increased reading comprehension, so if you have to read a big chunk of content, consider copying and pasting it into a Word document and making it TNR.

Use more unique fonts for reading retention

There’s a difference between understanding what you read and remembering it, and that’s where tricker, harder-to-read fonts come in. Some of the best research on font-associated disfluency—or “the metacognitive experience of difficulty associated with a cognitive task”—was published in 2010 and is still cited by researchers looking into font effects today. That research , from researchers at Princeton and Indiana University, involved two studies that ultimately found harder-to-read fonts like Haettenschweiler, Monotype Corsiva, or Comic Sans Italicized helped participants recall more material and perform better on exams in actual classrooms. To make a long, scientifically-jargony story short, your brain has to work a little harder to read those kinds of fonts, so you put in more effort and retain the content a little more.

When I tried this method last year, I opted for Pacifico—a loopy, italicized font I found in Google Docs—and used it to make vocabulary words stand out in my notes. Toggling between fonts as I typed helped me stay engaged, and listening for vocab words to write in Pacifico font helped, too. When I was reviewing the notes ahead of tests, I had to stop and focus on Pacifico vocab words to read them, and I wasn’t able to gloss over them like I normally would with good old Time New Roman. The authors of the 2010 study caution against using a font that is too hard to read, though, as that will render the whole attempt pretty useless. But Pacifico and Monotype Corsiva, an italicized serif font, are just unusual enough to require a little more effort without being too frustrating.

Don’t focus on bigger fonts for memory

While font types have been shown to matter a little bit when it comes to retaining information, there’s also an idea called the “font size effect,” which researchers say is a “metamemory illusion in which larger-font items produce higher judgments of learning (JOLs) but not better memory, relative to smaller-font items.” One publication did find that judgments of learning and memory accuracy were higher after people read larger-font items, but that was always in comparison to when they read smaller-font ones.

Basically, if you have notes where some elements are in a larger font than others, you might remember whatever was typed in the bigger font slightly better—but if you make your entire document a “larger” size, it’s not going to be super helpful, since it’s all relative. Focus less on the font size overall and also keep in mind that no matter what font you’re using, your study techniques, stress level, amount of study time, and environment are also going to play a role in your retention, so changing everything to Monotype Corsiva isn’t going to solve everything. It’s just one small tool in a much bigger kit.

The 24 Most Professional Fonts to Use

Stuart Crawford

Selecting the right font is an important design choice that can enhance—or detract from—the professionalism of a document. With thousands of fonts to choose from, the possibilities may seem endless. However, not all fonts are well-suited for professional business communications and documents.

This comprehensive guide explores the 24 most professional fonts to create polished, credible business documents that leave a positive impression. We analyse characteristics like readability, legibility, clarity, formality, visual appeal, and versatility to determine which fonts will top for professional use cases in 2024.

A Serif Sensation: Traditional Serif Fonts Offer Readability & Polish

1. times new roman.

This quintessential serif font designed for the New York Times newspaper 1931 remains a staple choice to exude professionalism. The fluid serifs and sturdy letterforms allow Times New Roman to be readable in print. The versatile design also displays well digitally. This font suggests the competence and trustworthiness key for professional communications.

Designed by Matthew Carter in 1993, this serif typeface contains thick, bracketed serifs for enhanced readability. Slightly wider letter proportion compared to Times New Roman improves clarity while maintaining a highly legible 11-point font size. The chunky, semi-bold weight is warm and refined for formal business uses.

3. Bookman Old Style

This classic, versatile serif face echoes Old Style typefaces used in publishing from the mid-1500s into the 1900s. Designed in 1884 by Alexander Lawson for the Century Schoolbook , the slightly condensed letterforms offer a more compact footprint without compressing readability. The sturdy serifs, graceful curves and horizontal stress suggest Old World heritage, perfect for adding gravitas to professional communications.

Key Takeaway: Traditional serif fonts like Times New Roman, Georgia and Bookman Old Style offer proven readability and polish well-suited for formal business documents.

Distinctive & Dignified: Transitional Serifs Bridge Generations

4. baskerville.

This refined, stately serif face designed by John Baskerville in 1757 defined transitional serif styles, forging a bridge from Old Style to modern looks. The crisp edges offer exceptional clarity, while distinctive ball terminals on letter curves add flair. Baskerville brings heritage elegance to contemporary professional settings, from resumes to reports.

5. New Baskerville

Released in 1917, this refreshed Baskerville interpretation by designer George W. Jones is often preferred for clarity on screens and modern printing presses. The slightly thicker strokes offer a bolder definition without compromising legibility. Pair with Georgia for font contrast that delivers professional polish.

6. Times Ten

Photosetting provider Linotype released this updated take on Times New Roman in 1990 to improve output on low-resolution printers and poor-quality paper stock. Subtle changes like shortened ascenders and descenders optimise modern legibility without forfeiting professional persona. The economical proportions also save space.

Key Takeaway: Transitional serif typefaces like Baskerville, New Baskerville and Times Ten marry historical richness with sharp digital display for today’s professional contexts.

Modern Serifs Marry Heritage With Contemporary Flair

Created by renowned German typographer Jan Tschichold in 1964, Sabon draws inspiration from classic Garamond designs but optimises for modern requirements. The Roman letterforms offer exceptional clarity and even texture suitable for continuous business reading—an excellent choice to communicate expertise.

8. ITC Legacy Serif

This 1993 serif release from the International Typeface Corporation retains Times New Roman’s professional personality but exhibits tighter spacing and finer hairlines for improved modern display. The condensed proportions occupy less real estate, allowing more content presentation.

9. Merriweather

Designed by Eben Sorkin in 2010 for Google Web Fonts, this free serif selection exhibits classic proportions and styling adapted for optimal clarity across print, web and digital media. The understated design promotes continuous reading while conveying competence for various professional communications, from handouts to websites.

Key Takeaway: Modern serif font interpretations like Sabon, ITC Legacy Serif and Merriweather smartly evolve heritage styling for today's professional, multi-media business needs.

Sans Serif Fonts Signal Modernity For The Digital Era

Initially designed by Monotype in 1982 to offer Helvetica -style appeal more economically, this ubiquitous neo-grotesque sans serif font conveys professionalism and modernity. The comfortably spaced proportions ensure approachability while promoting exceptional on-screen readability.

11. Helvetica Neue

This seminal, globally recognised neo-grotesque face originated from the 1957 Helvetica release. Designer Max Meidinger evolved the styling in 1983 to enhance spacing and strokes for improved digital rendering. The Swiss heritage of architectural clarity and purity perseveres through this digitally-optimized typeface.

12. Calibri

As the default font for Microsoft Office programs and Windows since 2007, Calibri offers a humanist sans serif option deeply familiar to modern business professionals. The rounded contours ensure approachability while the reliable rendering remains professionally polished across documents, slides, forms and other uses.

Key Takeaway: Leading neo-grotesque sans serifs like Arial, Helvetica Neue, and Calibri adopt simplified styling that crisply conveys professional digital-age messaging.

Specialised Sans Serifs Target Professional Needs

13. clearviewhwy.

Specifically tailored for road signage by designer Don Meeker in 1998, this humanist sans serif face allows extraordinary readability for content viewed from a moving vehicle. Tested and proven across state transportation departments, Clearview denotes authority for wayfinding signage applications.

14. Frutiger

This Univers-inspired sans serif, designed by Adrian Frutiger in 1976, improves visual hierarchy through letter variation. Numerals and glyphs are easily distinguished from letters to enhance clarity for signage and labelling purposes. The streamlined Swiss styling also denotes modern efficiency.

15. FF Mark

Designed by Erik Spiekermann in 2009, FF Mark offers a simplified, dotless construction derived from industrial German engineering and architectural signage applications dating to the 19th century. The functional format, stripped of superfluous strokes, delivers clear communication of professional content.

Key Takeaway: Field-specific sans serifs like ClearviewHwy, Frutiger , and FF Mark provide optimised displays targeted for professional signage or technical applications.

Authoritative & Distinctive: Professional Slab Serifs

16. rockwell.

Designer Frank Hinman released this bold, sturdy slab serif font 1934 for the Inland Type Foundry. The thick, monolinear strokes offer substantial visual presence, while softened rectangles lend friendlier allure. Rockwell brings commanding gravitas yet approachable warmth simultaneously to business communications.

HCI editor Matthew Carter designed this efficient slab serif family in 2001 for media conglomerate Martha Stewart Living Omnimedia exclusive use. Structured, compact strokes ensure clarity even at small sizes on inferior printing presses, maximising professional polish for publishing at scale.

18. Roboto Slab

Christian Robertson expanded his 2013 Roboto humanist sans serif into serif and slab serif families as core Google Fonts selections. Roboto Slab’s modern appearance and responsiveness across digital platforms offer a distinctive professional personality deviating from traditional expressions.

Key Takeaway: Distinctive professional slab serifs like Rockwell, Archer and Roboto Slab couple commanding visual presence with sturdy legibility to elevate business content .

Specialist Display Fonts Grab Professional Attention

This imposing caps-only Roman square capital's face echoes the solid strokes displayed prominently on Trajan ’s Column monument erected circa 113 AD. The all-caps letterforms project monumentality, allowing this font to emphasise professional titles, logos, signage and headlines with gravitas.

Paul Renner’s 1927 milestone project encapsulated Modernist design with ideological efficiency through ordered, geometric strokes. Branding professionals leverage Futura to communicate focus and innovation, while design principals rely on minimal expression to emphasise information density.

Inspired by architectural signage, designer Tobias Frere-Jones crafted this bold, structural alphabet in 2000 to evoke steadfast New York heritage. Professional designers rely on Gotham’s straightforward style to communicate confidence through headlines, titles, and branding elements .

Key Takeaway: Columnar Trajan, modern Futura, and architectural Gotham offer scalable display fonts to attract professional interest to titles, branding and headlines.

Handwritten Fonts Convey Personal and Professional Approachability

22. dearsarah sf pro.

Software developers Balance Type Foundry crafted this stylish, contemporary handwritten face in 2021 to inject personal warmth into professional communications. Ligatures between specific letter pairs boost intimacy while practising restraint to sustain polish, befitting more formal contexts like event invitations or featured callouts.

23. Sf Handwriting Dakota

This casual handwritten font comes courtesy of the digital agency Design K to resonate authentically with personal correspondence for professional introductions or outreach touchpoints. Designed with multilingual support, the global accessibility remains professionally inclusive.

24. Homemade Apple

Independent type designer Sam Parrett delivers this distinctive, organic handwritten face that combines whimsical, retro warmth akin to scampering chalkboard renderings with the approachability of a trusted neighbour. Professional applications could include feature headers in reports or emphasis lines within newsletters to boost engagement.

Key Takeaway: Casual handwritten fonts like DearSarah SF Pro, SF Handwriting Dakota, and Homemade Apple humanise professional messaging through personalised execution.

Combining Complementary Fonts Creates Hierarchy & Contrast

When combining fonts for professional communications:

• Align Serif & Sans Serif Faces – Pairing a serif such as Garamond or Times New Roman with a sans serif like Arial or Helvetica offers visual hierarchy through contrast.
• Vary Weights For Emphasis – Mix heavy, light or condensed weights of compatible font families to make key content stand out.
• Highlight Display vs Text – Blend sturdy display fonts like Impact or Gotham to accent readable text choices like Georgia or Calibri.
• Maintain Consistent Typography – Limit professional font combinations to 2 or 3 compatible families and remain consistent across branded touchpoints.

Key Takeaway: Thoughtfully blending 2-3 complementary fonts into professional communications clarifies visual hierarchy through strategic contrast.

5 Key Criteria Define Great Professional Fonts

• Readability – Strong letterforms deliver content consumption efficiently
• Legibility – Distinct characters discern at small sizes
• Clarity – Crisp definition promotes engagement
• Compatibility – Adapts gracefully across media formats
• Personality – Unique traits align with context

Key Takeaway: Professional font technical effectiveness must match appropriate contextual emotion and personality to achieve communications goals fully.

Most Professional Fonts – Recap At A Glance

• Serif – Times New Roman, Sabon, Georgia, Merriweather
• Sans Serif – Arial, Helvetica Neue, ClearviewHwy
• Slab Serif – Archer, Roboto Slab, Rockwell
• Display – Futura, Gotham, Trajan
• Handwritten – DearSarah SF Pro, Homemade Apple

Conclusion: Apply Thoughtful Typography For Professional Results

This expansive guide highlights 24 exceptional font faces spanning common professional categories like Serif, Sans Serif, Slab Serif, Display and Handwritten. Each recommended font qualifies for business usage through optimal legibility, compatibility across modern media, and personality characteristics that strategically match professional communications goals.

While the highlighted selections represent esteemed options, designers must carefully contemplate additional criteria like industry context, audience demographics and branded guidelines when specifying fonts for professional documents or communications. Traditional selections like Times New Roman remain prudent choices that reliably convey professional expectations for specific formal uses like legal briefs or financial statements. More progressive companies may incorporate distinctive yet legible modern fonts like Helvetica Neue or Roboto Slab to signal forward-thinking, design-focused appeal.

Above all, professional font selections rely on thoughtful implementation aligned to the specifics of the intended communication and consumption formats. Suitable fonts effectively capture attention, sharpen hierarchy, strengthen retention and promote clarity to optimise audience engagement. As fine dining plates must be expertly paired to complemental courses, precision font selections elevate messaging while underscoring competence and care through thoughtful typographic presentation.

Review these 24 versatile professional fonts for your next communications project, effortlessly conveying your expertise through strategic typography optimised for business results.

Frequently Asked Questions (FAQ) About Professional Fonts

What are the top 5 most professional fonts.

The five most versatile and professionally appropriate fonts include Times New Roman (Serif), Arial (Sans Serif), Archer (Slab Serif), Futura (Display) and DearSarah SF (Script). Each reliably offers legibility, compatibility and polish for business uses.

What font does Google use?

Product Sans is the primary Google font applied in branding and communications. The custom-designed geometric sans serif offers friendly simplicity aligned with Google's accessible brand personality.

What is the most attractive font?

Beauty proves subjective; attractive fonts vary by audience and context. Classic serifs like Bodoni and Didot offer elegant, fashionable appeal. Friendlier picks like Brush Script and Great Vibes provide emotive warmth. Helvetica Neue and Futura convey sleek modernity.

What fonts do lawyers use?

Legal conventions rely on tradition, so most attorneys use customary fonts like Times New Roman, Arial and Courier New for contracts, rulings and communications upholding document integrity expectations. More progressive firms occasionally incorporate contemporary alternatives like Calibri and Georgia.

What font size is best for professional documents?

Content legibility proves essential for professional communications. Print documents should use at least 11pt font size. Digital presentations can scale down to 8pt font size. Headings should run 2-4pts larger to establish hierarchy. More essential documents may use 12-14pt for optimal clarity.

Related Posts

• Logo Design Rules: 10 Golden Rules for Crafting Logos
• Integrated Office Technology: Streamlining Business Operations
• InDesign vs Illustrator: Which Design Software Should You Use?
• The Vital Role of Graphic Design in Marketing
• How To Design A Corporate Website
• 30 Best WordPress Plugins to Supercharge Your Website
• 50+ Best Gifts for Designers on Every Budget
• Improving the Ecommerce Customer Experience

Need help Building your Brand?

Let’s talk about your logo, branding or web development project today! Get in touch for a free quote.

Leave a Comment Cancel reply

Trusted by businesses worldwide to create impactful and memorable brands.

At Inkbot Design, we understand the importance of brand identity. With our team of experienced designers and marketing professionals, we are dedicated to creating custom solutions that elevate your brand and leave a lasting impression on your target audience.

• Color Palettes
• Baseball Team Colors
• NHL Team Colors
• Superhero Fonts
• Gaming Fonts
• Brand Fonts
• Fonts from Movies
• Similar Fonts
• What’s That Font
• Photoshop Resources
• Slide Templates
• Fast Food Logos
• Superhero logos
• Tech company logos
• Shoe Brand Logos
• Motorcycle Logos
• Grocery Store Logos
• Pharmaceutical Logos
• English Football Team Logos
• German Football Team Logos
• Spanish Football Teams Logos
• Graphic Design Basics
• Beer Brand Ads
• Car Brand Ads
• Fashion Brand Ads
• Fast Food Brand Ads
• Shoe Brand Ads
• Tech Company Ads
• Motion graphics
• Infographics
• Design Roles
• Tools and apps
• CSS & HTML
• Program interfaces
• Drawing tutorials

The Stade Rennais Logo History, Colors,

Sacramento Kings colors – Hex, RGB,

The Olympique Lyonnais Logo History, Colors,

What Font Is in the Ford

Design Your Way is a brand owned by SBC Design Net SRL Str. Caminului 30, Bl D3, Sc A Bucharest, Romania Registration number RO32743054 But you’ll also find us on Blvd. Ion Mihalache 15-17 at Mindspace Victoriei

[email protected]

• What's That Font

What Font Is Used In MLA Format? Academic Typography

• BY Bogdan Sandu
• 26 September 2024

Ever found yourself staring at a blank page, agonizing over the details of formatting your research paper? The last thing you want is to lose points because you got the basics wrong. Yes, basics like  choosing the right font in MLA format .

You’re here because you need clarity. Maybe you’re preparing an  academic paper  or revising your  college essay , and let’s face it—nailing the format is as crucial as the content itself.

By the end of this article, you’ll have a rock-solid understanding of the  Modern Language Association  ( MLA ) guidelines on font usage.

We’ll deep-dive into  Times New Roman , explore the logic behind the  12-point font size rule , and highlight essential  formatting rules  that elevate your work from average to outstanding.

Stay tuned as we break down these guidelines, ensuring your  scholarly writing  meets the highest standards. Whether it’s  in-text citations ,  double spacing , or  work cited lists , every detail matters. Let’s get you the A+ you deserve.

What Font Is Used In MLA Format?

MLA format primarily recommends using  12-point Times New Roman  as the standard font for academic papers . This choice is favored for its readability and universal availability on most computers. Other acceptable fonts include  Arial and  Georgia , which also maintain legibility .

In addition to font choice, MLA guidelines specify that the text should be double-spaced, with one-inch margins on all sides, and that the first line of each paragraph should be indented by half an inch . Consistency in font usage throughout the document is also emphasized to maintain professionalism and adherence to formatting standards.

What Font Is Used in MLA Format

You’ve got your research all figured out. Your sources are pristine. But what about the font? Trust me, the font may seem trivial, but it’s super important for your  academic paper . So, what’s the golden rule for fonts in  MLA format ?

MLA, aka the  Modern Language Association , has set down some pretty clear guidelines. The top pick is  Times New Roman , 12-point size. This font is your go-to for an academic feel. It’s like the tuxedo of fonts for your  college essay .

Why Times New Roman?

Times New Roman isn’t just a random choice. It’s a  serif font , which means it has tiny lines at the end of each letter. These lines help guide the eyes, making long texts easier to read. When your professor is sifting through dozens of papers, having an easy-to-read font can make your work stand out—in a good way. Plus, the 12-point size is just the right balance—large enough to be readable, small enough to fit more text on each page.

Matching the MLA Guidelines

But, it’s not just about the font. MLA guides your entire  document layout . You need  1-inch margins  all around, and  double spacing  is a must. Don’t forget to  indent the first line of each paragraph . Using  Times New Roman  makes it easier to meet all these formatting rules without any fuss.

Alternatives Fonts to Use

So, what if you’re not a fan of Times New Roman? Or maybe you want to add a bit of personal flair? While  MLA  really advocates for Times New Roman, they’re not completely rigid. There are alternatives, but you’ve got to be cautious.

Other Safe Choices

Fonts like  Arial  and  Calibri  can be good backups. These are  sans-serif fonts , meaning they don’t have those little lines at the end of each letter. Modern, clean, and still quite professional. Just stick with a  12-point size  to remain within  MLA guidelines . Your content should still be legible and user-friendly.

When to Flex Creativity

Some academic advisors might give you a bit of wiggle room. In rare cases, you might hear about  serif fonts like Garamond  or even  Georgia . These fonts maintain the readability that MLA format loves while adding a touch of modernity. Be careful; always get confirmation from your professor or advisor before deviating from the established norm.

Key Point:  Stick with the classics unless given a definite green light to experiment. Remember, you’re aiming for readability, not a design award.

Font Size and Text Formatting

Orlando Magic colors – Hex, RGB, CMYK, and Pantone

The toulouse logo history, colors, font, and meaning.

You may also like

The Amazon font. What font does Amazon use? (Answered)

• Bogdan Sandu
• 5 January 2023

The Spotify font and what font does Spotify use (Answered)

• 8 January 2023